Home

Standards catalogue

Subscribe to updates

ISO/TC 6  - Paper, board and pulps

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 6 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 186:2002
Paper and board -- Sampling to determine average quality
90.93 85.060ISO/TC 6/SC 2
ISO 187:1990
Paper, board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
90.93 85.060
85.040
ISO/TC 6/SC 2
ISO 216:2007
Writing paper and certain classes of printed matter -- Trimmed sizes -- A and B series, and indication of machine direction
90.93 85.080.10ISO/TC 6
ISO 217:2013
Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction
60.60 85.060ISO/TC 6
ISO 287:2009
Paper and board -- Determination of moisture content of a lot -- Oven-drying method
90.60 85.060ISO/TC 6/SC 2
ISO 302:2004
Pulps -- Determination of Kappa number
90.92 85.040ISO/TC 6
ISO 534:2011
Paper and board -- Determination of thickness, density and specific volume
60.60 85.060ISO/TC 6/SC 2
ISO 535:2014
Paper and board -- Determination of water absorptiveness -- Cobb method
60.60 85.060ISO/TC 6/SC 2
ISO 536:2012
Paper and board -- Determination of grammage
60.60 85.060ISO/TC 6/SC 2
ISO 638:2008
Paper, board and pulps -- Determination of dry matter content -- Oven-drying method
90.93 85.060
85.040
ISO/TC 6
ISO 692:1982
Pulps -- Determination of alkali solubility
90.93 85.040ISO/TC 6
ISO 699:1982
Pulps -- Determination of alkali resistance
90.92 85.040ISO/TC 6
ISO 776:2011
Pulps -- Determination of acid-insoluble ash
60.60 85.040ISO/TC 6
ISO 801-1:1994
Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
90.93 85.040ISO/TC 6
ISO 801-2:1994
Pulps -- Determination of saleable mass in lots -- Part 2: Pulps (such as flash-dried pulps) baled in slabs
90.93 85.040ISO/TC 6
ISO 801-3:1994
Pulps -- Determination of saleable mass in lots -- Part 3: Unitized bales
90.93 85.040ISO/TC 6
ISO 838:1974
Paper -- Holes for general filing purposes -- Specifications
90.93 85.080.10
01.140.30
ISO/TC 6
ISO 1762:2001
Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C
90.92 85.040ISO/TC 6
ISO 1924-2:2008
Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method (20 mm/min)
90.93 85.060ISO/TC 6/SC 2
ISO 1924-3:2005
Paper and board -- Determination of tensile properties -- Part 3: Constant rate of elongation method (100 mm/min)
90.60 85.060ISO/TC 6/SC 2
ISO 1974:2012
Paper -- Determination of tearing resistance -- Elmendorf method
60.60 85.060ISO/TC 6/SC 2
ISO 2144:1997
Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
90.92 85.060ISO/TC 6
ISO 2469:2014
Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)
60.60 85.060
85.040
ISO/TC 6
ISO 2470-1:2009
Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)
90.20 85.060
85.040
ISO/TC 6
ISO 2470-2:2008
Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness)
90.93 85.060
85.040
ISO/TC 6
ISO 2471:2008
Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method
90.93 85.060ISO/TC 6
ISO 2493-1:2010
Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection
60.60 85.060ISO/TC 6/SC 2
ISO 2493-2:2011
Paper and board -- Determination of bending resistance -- Part 2: Taber-type tester
60.60 85.060ISO/TC 6/SC 2
ISO 2528:1995
Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method
90.93 85.060ISO/TC 6/SC 2
ISO 2758:2014
Paper -- Determination of bursting strength
60.60 85.060ISO/TC 6/SC 2
ISO 2759:2014
Board -- Determination of bursting strength
60.60 85.060ISO/TC 6/SC 2
ISO 3034:2011
Corrugated fibreboard -- Determination of single sheet thickness
60.60 85.060ISO/TC 6/SC 2
ISO 3035:2011
Corrugated fibreboard -- Determination of flat crush resistance
60.60 85.060ISO/TC 6/SC 2
ISO 3036:1975
Board -- Determination of puncture resistance
90.60 85.060ISO/TC 6/SC 2
ISO 3037:2013
Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)
60.60 85.060ISO/TC 6/SC 2
ISO 3038:1975
Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion
90.93 85.060ISO/TC 6/SC 2
ISO 3039:2010
Corrugated fibreboard -- Determination of grammage of the component papers after separation
60.60 85.060ISO/TC 6/SC 2
ISO 3260:1982
Pulps -- Determination of chlorine consumption (Degree of delignification)
90.92 85.040ISO/TC 6
ISO 3688:1999
Pulps -- Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
90.93 85.040ISO/TC 6
ISO 3689:1983
Paper and board -- Determination of bursting strength after immersion in water
90.60 85.060ISO/TC 6/SC 2
ISO 3781:2011
Paper and board -- Determination of tensile strength after immersion in water
60.60 85.060ISO/TC 6/SC 2
ISO 3783:2006
Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model)
90.93 85.060ISO/TC 6/SC 2
ISO 4046-1:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index
95.20 01.040.85
85.040
85.020
85.060
ISO/TC 6
ISO 4046-2:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 2: Pulping terminology
95.20 01.040.85
85.040
ISO/TC 6
ISO 4046-3:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 3: Paper-making terminology
95.20 01.040.85
85.020
ISO/TC 6
ISO 4046-4:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products
95.20 01.040.85
85.060
ISO/TC 6
ISO 4046-5:2002
Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board
95.20 01.040.85
85.040
85.060
ISO/TC 6
ISO 4094:2005
Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories
90.92 85.040
85.060
85.020
ISO/TC 6
ISO 4119:1995
Pulps -- Determination of stock concentration
90.93 85.040ISO/TC 6
ISO 5263-1:2004
Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps
90.93 85.040ISO/TC 6
ISO 5263-2:2004
Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C
90.93 85.040ISO/TC 6
ISO 5263-3:2004
Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees C
90.93 85.040ISO/TC 6
ISO 5264-1:1979
Pulps -- Laboratory beating -- Part 1: Valley beater method
90.93 85.040ISO/TC 6
ISO 5264-2:2011
Pulps -- Laboratory beating -- Part 2: PFI mill method
60.60 85.040ISO/TC 6
ISO 5267-1:1999
Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method
90.93 85.040ISO/TC 6
ISO 5267-1:1999/Cor 1:2001
60.60 85.040ISO/TC 6
ISO 5267-2:2001
Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method
90.93 85.040ISO/TC 6
ISO 5269-1:2005
Pulps -- Preparation of laboratory sheets for physical testing -- Part 1: Conventional sheet-former method
90.93 85.040ISO/TC 6
ISO 5269-2:2004
Pulps -- Preparation of laboratory sheets for physical testing -- Part 2: Rapid-Köthen method
90.93 85.040ISO/TC 6
ISO 5269-3:2008
Pulps -- Preparation of laboratory sheets for physical testing -- Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system
90.93 85.040ISO/TC 6
ISO 5270:2012
Pulps -- Laboratory sheets -- Determination of physical properties
60.60 85.040ISO/TC 6
ISO 5350-1:2006
Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light
90.93 85.040ISO/TC 6
ISO 5350-2:2006
Pulps -- Estimation of dirt and shives -- Part 2: Inspection of mill sheeted pulp by transmitted light
90.93 85.040ISO/TC 6
ISO 5350-3:2007
Pulps - Estimation of dirt and shives -- Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method
90.93 85.040ISO/TC 6
ISO 5350-4:2006
Pulps -- Estimation of dirt and shives -- Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method
90.93 85.040ISO/TC 6
ISO 5351:2010
Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
60.60 85.040ISO/TC 6
ISO 5626:1993
Paper -- Determination of folding endurance
90.60 85.060ISO/TC 6/SC 2
ISO 5627:1995
Paper and board -- Determination of smoothness (Bekk method)
90.93 85.060ISO/TC 6/SC 2
ISO 5627:1995/Cor 1:2002
60.60 85.060ISO/TC 6/SC 2
ISO 5628:2012
Paper and board -- Determination of bending stiffness -- General principles for two-point, three-point and four-point methods
60.60 85.060ISO/TC 6/SC 2
ISO 5629:1983
Paper and board -- Determination of bending stiffness -- Resonance method
90.60 85.060ISO/TC 6/SC 2
ISO 5630-1:1991
Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C
90.93 85.060ISO/TC 6/SC 2
ISO 5630-3:1996
Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
90.93 85.060ISO/TC 6/SC 2
ISO 5630-4:1986
Paper and board -- Accelerated ageing -- Part 4: Dry heat treatment at 120 or 150 degrees C
90.93 85.060ISO/TC 6/SC 2
ISO 5630-5:2008
Paper and board -- Accelerated ageing -- Part 5: Exposure to elevated temperature at 100 degrees C
90.93 85.060ISO/TC 6/SC 2
ISO 5630-6:2009
Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
90.60 85.060ISO/TC 6/SC 2
ISO 5630-7:2014
Paper and board -- Accelerated ageing -- Part 7: Exposure to light
60.60 85.060ISO/TC 6/SC 2
ISO 5631-1:2009
Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)
90.92 85.060ISO/TC 6
ISO 5631-2:2014
Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)
90.92 85.060ISO/TC 6
ISO 5631-3:2014
Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)
90.92 85.060ISO/TC 6
ISO 5633:1983
Paper and board -- Determination of resistance to water penetration
90.60 85.060ISO/TC 6/SC 2
ISO 5635:1978
Paper -- Measurement of dimensional change after immersion in water
90.93 85.060ISO/TC 6/SC 2
ISO 5636-1:1984
Paper and board -- Determination of air permeance (medium range) -- Part 1: General method
90.93 85.060ISO/TC 6/SC 2
ISO 5636-3:2013
Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method
60.60 85.060ISO/TC 6/SC 2
ISO 5636-4:2013
Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method
60.60 85.060ISO/TC 6/SC 2
ISO 5636-5:2013
Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method
60.60 85.060ISO/TC 6/SC 2
ISO 5637:1989
Paper and board -- Determination of water absorption after immersion in water
90.93 85.060ISO/TC 6/SC 2
ISO 5638:1978
Solid fibreboard -- Determination of grammage of single layers
90.93 85.060ISO/TC 6/SC 2
ISO 5647:1990
Paper and board -- Determination of titanium dioxide content
90.93 85.060ISO/TC 6
ISO 6587:1992
Paper, board and pulps -- Determination of conductivity of aqueous extracts
90.93 85.060
85.040
ISO/TC 6
ISO 6588-1:2012
Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction
60.60 85.060
85.040
ISO/TC 6
ISO 6588-2:2012
Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction
60.60 85.060
85.040
ISO/TC 6
ISO 7213:1981
Pulps -- Sampling for testing
90.93 85.040ISO/TC 6
ISO 7263:2011
Corrugating medium -- Determination of the flat crush resistance after laboratory fluting
60.60 85.060ISO/TC 6/SC 2
ISO 8226-1:1994
Paper and board -- Measurement of hygroexpansivity -- Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
90.93 85.060ISO/TC 6/SC 2
ISO 8226-2:1990
Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %
90.93 85.060ISO/TC 6/SC 2
ISO 8254-1:2009
Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam, TAPPI method
90.60 85.060ISO/TC 6
ISO 8254-2:2003
Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method
90.92 85.060ISO/TC 6
ISO 8254-3:2004
Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method
90.92 85.060ISO/TC 6
ISO 8784-1:2005
Pulp, paper and board -- Microbiological examination -- Part 1: Total count of bacteria, yeast and mould based on disintegration
90.92 07.100.99
85.040
85.060
ISO/TC 6/SC 2
ISO 8787:1986
Paper and board -- Determination of capillary rise -- Klemm method
90.93 85.060ISO/TC 6/SC 2
ISO 8791-1:1986
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method
90.93 85.060ISO/TC 6/SC 2
ISO 8791-2:2013
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method
60.60 85.060ISO/TC 6/SC 2
ISO 8791-3:2005
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method
90.93 85.060ISO/TC 6/SC 2
ISO 8791-4:2007
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method
90.93 85.060ISO/TC 6/SC 2
ISO 9184-1:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method
90.93 85.040
85.060
ISO/TC 6
ISO 9184-2:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide
90.93 85.040
85.060
ISO/TC 6
ISO 9184-3:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test
90.93 85.040
85.060
ISO/TC 6
ISO 9184-4:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test
90.93 85.040
85.060
ISO/TC 6
ISO 9184-5:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)
90.93 85.040
85.060
ISO/TC 6
ISO 9184-6:1994
Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness
90.93 85.040
85.060
ISO/TC 6
ISO 9184-7:1994
Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor
90.93 85.060
85.040
ISO/TC 6
ISO 9197:2006
Paper, board and pulps -- Determination of water-soluble chlorides
90.93 85.060
85.040
ISO/TC 6
ISO 9198:2001
Paper, board and pulp -- Determination of water-soluble sulfates
90.93 85.060
85.040
ISO/TC 6
ISO 9416:2009
Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
90.60 85.060
85.040
ISO/TC 6
ISO 9895:2008
Paper and board -- Compressive strength -- Short-span test
90.93 85.060ISO/TC 6/SC 2
ISO 9932:1990
Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods
90.93 85.060ISO/TC 6/SC 2
ISO 10376:2011
Pulps -- Determination of mass fraction of fines
60.60 85.040ISO/TC 6
ISO 10716:1994
Paper and board -- Determination of alkali reserve
90.93 85.060ISO/TC 6
ISO 10775:2013
Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method
60.60 85.040
85.060
ISO/TC 6
ISO 11093-1:1994
Paper and board -- Testing of cores -- Part 1: Sampling
90.93 85.060ISO/TC 6
ISO 11093-2:1994
Paper and board -- Testing of cores -- Part 2: Conditioning of test samples
90.93 85.060ISO/TC 6
ISO 11093-3:1994
Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method
90.93 85.060ISO/TC 6
ISO 11093-4:1997
Paper and board -- Testing of cores -- Part 4: Measurement of dimensions
90.92 85.060ISO/TC 6
ISO 11093-5:2009
Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation
90.20 85.060ISO/TC 6
ISO 11093-5:2009/Cor 1:2010
60.60 85.060ISO/TC 6
ISO 11093-6:2005
Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
90.93 85.060ISO/TC 6
ISO 11093-7:2011
Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
60.60 85.060ISO/TC 6
ISO 11093-8:2012
Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
60.60 85.060ISO/TC 6
ISO 11093-8:2012/Cor 1:2013
60.60 85.060ISO/TC 6
ISO 11093-9:2006
Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance
90.93 85.060ISO/TC 6
ISO/TR 11371:2013
Pulps -- Basic guidelines for laboratory refining
60.60 85.040ISO/TC 6
ISO 11475:2004
Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
90.92 85.060ISO/TC 6
ISO 11476:2010
Paper and board -- Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)
90.92 85.060ISO/TC 6
ISO 11480:1997
Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
90.93 85.040
85.060
ISO/TC 6
ISO 11556:2005
Paper and board -- Determination of curl using a single vertically suspended test piece
90.93 85.060ISO/TC 6/SC 2
ISO 12192:2011
Paper and board -- Determination of compressive strength -- Ring crush method
60.60 85.060ISO/TC 6/SC 2
ISO 12625-1:2011
Tissue paper and tissue products -- Part 1: General guidance on terms
60.60 01.040.85
85.060
ISO/TC 6/SC 2
ISO 12625-3:2014
Tissue paper and tissue products -- Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
60.60 85.060ISO/TC 6/SC 2
ISO 12625-4:2005
Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption
90.92 85.060ISO/TC 6/SC 2
ISO 12625-5:2005
Tissue paper and tissue products -- Part 5: Determination of wet tensile strength
90.92 85.060ISO/TC 6/SC 2
ISO 12625-6:2005
Tissue paper and tissue products -- Part 6: Determination of grammage
90.92 85.060ISO/TC 6/SC 2
ISO 12625-7:2014
Tissue paper and tissue products -- Part 7: Determination of optical properties -- Measurement of brightness and colour with D65/10° (outdoor daylight)
60.60 85.060ISO/TC 6/SC 2
ISO 12625-8:2010
Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
60.60 85.060ISO/TC 6/SC 2
ISO 12625-9:2005
Tissue paper and tissue products -- Part 9: Determination of ball burst strength
90.92 85.060ISO/TC 6/SC 2
ISO 12625-11:2012
Tissue paper and tissue products -- Part 11: Determination of wet ball burst strength
60.60 85.060ISO/TC 6/SC 2
ISO 12625-12:2010
Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency
60.60 85.060ISO/TC 6/SC 2
ISO 12830:2011
Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
60.60 85.060
85.040
ISO/TC 6
ISO 13542:2006
Paper and board -- Specification for internal diameters of cores for reels
90.93 85.060ISO/TC 6
ISO 13820:2014
Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment
60.60 85.100ISO/TC 6/SC 2
ISO 13821:2002
Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method
90.93 85.060ISO/TC 6/SC 2
ISO 14436:2010
Pulps -- Standard tap water for drainability measurements -- Conductivity 40 mS/m to 150 mS/m
60.60 85.040ISO/TC 6
ISO 14453:2014
Pulps -- Determination of acetone-soluble matter
60.60 85.040ISO/TC 6
ISO 14487:1997
Pulps -- Standard water for physical testing
90.93 85.040ISO/TC 6
ISO 14968:1999
Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets
90.93 85.060ISO/TC 6/SC 2
ISO 15318:1999
Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB)
90.93 85.060
85.040
ISO/TC 6
ISO 15320:2011
Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract
60.60 85.060
85.040
ISO/TC 6
ISO 15359:1999
Paper and board -- Determination of the static and kinetic coefficients of friction -- Horizontal plane method
90.93 85.060ISO/TC 6/SC 2
ISO 15360-1:2000
Recycled pulps -- Estimation of Stickies and Plastics -- Part 1: Visual method
90.93 85.040ISO/TC 6
ISO 15360-2:2001
Recycled pulps -- Estimation of Stickies and Plastics -- Part 2: Image analysis method
90.92 85.040ISO/TC 6
ISO 15360-2:2001/Cor 1:2007
60.60 85.040ISO/TC 6
ISO 15361:2000
Pulps -- Determination of zero-span tensile strength, wet or dry
90.93 85.040ISO/TC 6
ISO 15754:2009
Paper and board -- Determination of z-directional tensile strength
90.60 85.060ISO/TC 6/SC 2
ISO 15755:1999
Paper and board -- Estimation of contraries
90.93 85.060ISO/TC 6/SC 2
ISO 16065-1:2014
Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method
60.60 85.040ISO/TC 6
ISO 16065-2:2014
Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method
60.60 85.040ISO/TC 6
ISO 16532-1:2008
Paper and board -- Determination of grease resistance -- Part 1: Permeability test
90.93 85.060ISO/TC 6/SC 2
ISO 16532-2:2007
Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test
90.93 85.060ISO/TC 6/SC 2
ISO 16532-3:2010
Paper and board -- Determination of grease resistance -- Part 3: Turpentine test for voids in glassine and greaseproof papers
60.60 85.060ISO/TC 6/SC 2
ISO 16945:2014
Corrugating medium -- Determination of the edge crush resistance after laboratory fluting
60.60 85.060ISO/TC 6/SC 2
ISO 17812:2007
Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper
90.93 85.040
85.060
ISO/TC 6
ISO/TS 17958:2013
Paper and board -- Determination of fracture toughness -- Constant rate of elongation method (1,7 mm/s)
60.60 85.060ISO/TC 6/SC 2
ISO 22414:2004
Paper -- Cut-size office paper -- Measurement of edge quality
90.93 85.060
85.080.10
ISO/TC 6/SC 2
ISO 22754:2008
Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
90.93 85.040
85.060
ISO/TC 6
ISO 22891:2013
Paper -- Determination of transmittance by diffuse reflectance measurement
60.60 85.060ISO/TC 6
ISO 23713:2005
Pulps -- Determination of fibre coarseness by automated optical analysis -- Polarized light method
90.93 85.040ISO/TC 6
ISO 23714:2014
Pulps -- Determination of water retention value (WRV)
60.60 85.040ISO/TC 6
ISO/TR 24498:2006
Paper, board and pulps -- Estimation of uncertainty for test methods
90.92 85.060
85.040
ISO/TC 6
ISO/TR 25477:2008
Paper, board and pulps - Basic guidelines for image analysis measurements
60.60 85.060
85.040
ISO/TC 6
ISO 29681:2009
Paper, board and pulps -- Determination of pH of salted water extracts
60.60 85.040ISO/TC 6