Home

Standards catalogue

Subscribe to updates

ISO/TC 6  - Paper, board and pulps

Items to be displayed:


Subcommittees

Subcommittee Subcommittee Title
ISO/TC 6/SC 2 Test methods and quality specifications for paper and board

Standards and projects under the direct responsibility of ISO/TC 6 Secretariat

Standard and/or projectStageICS
ISO 216:2007
Writing paper and certain classes of printed matter -- Trimmed sizes -- A and B series, and indication of machine direction
90.93 85.080.10
ISO 217:2013
Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction
60.60 85.060
ISO 302:2015
Pulps -- Determination of Kappa number
60.60 85.040
ISO 638:2008
Paper, board and pulps -- Determination of dry matter content -- Oven-drying method
90.93 85.060
85.040
ISO 692:1982
Pulps -- Determination of alkali solubility
90.93 85.040
ISO 699:2015
Pulps -- Determination of alkali resistance
60.60 85.040
ISO 776:2011
Pulps -- Determination of acid-insoluble ash
90.60 85.040
ISO 801-1:1994
Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
90.93 85.040
ISO 801-2:1994
Pulps -- Determination of saleable mass in lots -- Part 2: Pulps (such as flash-dried pulps) baled in slabs
90.93 85.040
ISO 801-3:1994
Pulps -- Determination of saleable mass in lots -- Part 3: Unitized bales
90.93 85.040
ISO 838:1974
Paper -- Holes for general filing purposes -- Specifications
90.93 85.080.10
01.140.30
ISO 1762:2015
Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C
60.60 85.040
ISO 2144:2015
Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C
60.60 85.060
ISO 2469:2014
Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)
60.60 85.060
85.040
ISO 2470-1:2016
Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)
60.60 85.060
85.040
ISO 2470-2:2008
Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness)
90.20 85.060
85.040
ISO 2471:2008
Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method
90.20 85.060
ISO 3260:2015
Pulps -- Determination of chlorine consumption (Degree of delignification)
60.60 85.040
ISO 3688:1999
Pulps -- Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
90.93 85.040
ISO 4046-1:2016
Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index
60.60 85.040
01.040.85
85.060
85.020
ISO 4046-2:2016
Paper, board, pulps and related terms -- Vocabulary -- Part 2: Pulping terminology
60.60 85.040
01.040.85
ISO 4046-3:2016
Paper, board, pulps and related terms -- Vocabulary -- Part 3: Paper-making terminology
60.60 01.040.85
85.020
ISO 4046-4:2016
Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products
60.60 85.060
01.040.85
ISO 4046-5:2016
Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board
60.60 85.060
85.040
01.040.85
ISO/DIS 4094
Paper, board and pulps -- General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3
40.20 85.040
85.060
85.020
ISO 4094:2005
Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories
90.92 85.040
85.060
85.020
ISO 4119:1995
Pulps -- Determination of stock concentration
90.93 85.040
ISO 5263-1:2004
Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps
90.93 85.040
ISO 5263-2:2004
Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C
90.93 85.040
ISO 5263-3:2004
Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees C
90.93 85.040
ISO 5264-1:1979
Pulps -- Laboratory beating -- Part 1: Valley beater method
90.93 85.040
ISO 5264-2:2011
Pulps -- Laboratory beating -- Part 2: PFI mill method
90.93 85.040
ISO 5267-1:1999
Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method
90.93 85.040
ISO 5267-1:1999/Cor 1:2001
60.60 85.040
ISO 5267-2:2001
Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method
90.93 85.040
ISO 5269-1:2005
Pulps -- Preparation of laboratory sheets for physical testing -- Part 1: Conventional sheet-former method
90.93 85.040
ISO 5269-2:2004
Pulps -- Preparation of laboratory sheets for physical testing -- Part 2: Rapid-Köthen method
90.93 85.040
ISO 5269-3:2008
Pulps -- Preparation of laboratory sheets for physical testing -- Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system
90.60 85.040
ISO 5270:2012
Pulps -- Laboratory sheets -- Determination of physical properties
60.60 85.040
ISO 5350-1:2006
Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light
90.93 85.040
ISO 5350-2:2006
Pulps -- Estimation of dirt and shives -- Part 2: Inspection of mill sheeted pulp by transmitted light
90.93 85.040
ISO 5350-3:2007
Pulps - Estimation of dirt and shives -- Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method
90.93 85.040
ISO 5350-4:2006
Pulps -- Estimation of dirt and shives -- Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method
90.93 85.040
ISO 5351:2010
Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
90.93 85.040
ISO 5631-1:2015
Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)
60.60 85.060
ISO 5631-2:2015
Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)
60.60 85.060
ISO 5631-3:2015
Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)
60.60 85.060
ISO 5647:1990
Paper and board -- Determination of titanium dioxide content
90.93 85.060
ISO 6587:1992
Paper, board and pulps -- Determination of conductivity of aqueous extracts
90.93 85.060
85.040
ISO 6588-1:2012
Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction
60.60 85.060
85.040
ISO 6588-2:2012
Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction
60.60 85.060
85.040
ISO 7213:1981
Pulps -- Sampling for testing
90.93 85.040
ISO 8254-1:2009
Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam, TAPPI method
90.93 85.060
ISO 8254-2:2016
Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method
60.60 85.060
ISO 8254-3:2016
Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method
60.60 85.060
ISO 9184-1:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method
90.93 85.040
85.060
ISO 9184-2:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide
90.93 85.040
85.060
ISO 9184-3:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test
90.93 85.040
85.060
ISO 9184-4:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test
90.93 85.040
85.060
ISO 9184-5:1990
Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)
90.93 85.040
85.060
ISO 9184-6:1994
Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness
90.20 85.040
85.060
ISO 9184-7:1994
Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor
90.20 85.040
85.060
ISO 9197:2016
Paper, board and pulps -- Determination of water-soluble chlorides
60.60 85.060
85.040
ISO 9198:2001
Paper, board and pulp -- Determination of water-soluble sulfates
90.93 85.060
85.040
ISO 9416:2009
Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
90.92 85.060
85.040
ISO/PRF 9416
Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
50.00 85.060
85.040
ISO 10376:2011
Pulps -- Determination of mass fraction of fines
90.93 85.040
ISO/TR 10688:2015
Paper, board and pulps -- Basic terms and equations for optical properties
60.60 85.040
85.060
ISO 10716:1994
Paper and board -- Determination of alkali reserve
90.93 85.060
ISO 10775:2013
Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method
60.60 85.040
85.060
ISO 11093-1:1994
Paper and board -- Testing of cores -- Part 1: Sampling
90.20 85.060
ISO 11093-2:1994
Paper and board -- Testing of cores -- Part 2: Conditioning of test samples
90.20 85.060
ISO 11093-3:1994
Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method
90.20 85.060
ISO 11093-4:2016
Paper and board -- Testing of cores -- Part 4: Measurement of dimensions
60.60 85.060
ISO 11093-5:2016
Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation
60.60 85.060
ISO 11093-6:2005
Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
90.93 85.060
ISO 11093-7:2011
Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
90.60 85.060
ISO/FDIS 11093-8
Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
50.00 85.060
ISO 11093-8:2012
Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
90.92 85.060
ISO 11093-8:2012/Cor 1:2013
60.60 85.060
ISO 11093-9:2006
Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance
90.93 85.060
ISO/TR 11371:2013
Pulps -- Basic guidelines for laboratory refining
60.60 85.040
ISO 11475:2004
Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
90.92 85.060
ISO/FDIS 11475
Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
50.00 85.060
ISO 11476:2016
Paper and board -- Determination of CIE whiteness, C/2° (indoor illumination conditions)
60.60 85.060
ISO 11480:1997
Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
90.92 85.040
85.060
ISO/PRF 11480
Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
50.00 85.040
85.060
ISO 12830:2011
Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
90.20 85.060
85.040
ISO 13542:2006
Paper and board -- Specification for internal diameters of cores for reels
90.93 85.060
ISO 14436:2010
Pulps -- Standard tap water for drainability measurements -- Conductivity 40 mS/m to 150 mS/m
90.93 85.040
ISO 14453:2014
Pulps -- Determination of acetone-soluble matter
60.60 85.040
ISO 14487:1997
Pulps -- Standard water for physical testing
90.93 85.040
ISO 15318:1999
Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB)
90.93 85.060
85.040
ISO 15320:2011
Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract
90.60 85.060
85.040
ISO 15360-1:2000
Recycled pulps -- Estimation of Stickies and Plastics -- Part 1: Visual method
90.93 85.040
ISO 15360-2:2015
Recycled pulps -- Estimation of Stickies and Plastics -- Part 2: Image analysis method
60.60 85.040
ISO 15361:2000
Pulps -- Determination of zero-span tensile strength, wet or dry
90.93 85.040
ISO 16065-1:2014
Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method
60.60 85.040
ISO 16065-2:2014
Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method
60.60 85.040
ISO 17812:2007
Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper
90.93 85.040
85.060
ISO 18522:2016
Paper and board -- Automated off-line testing of physical properties for CD (cross direction) profiles
60.60 85.060
ISO/TS 20460:2015
Paper and board -- Automated on-line testing -- Metrological comparability between standardized measurements and output of on-line gauges
60.60 85.060
ISO/WD 21331
Graphic technology -- Assessment guidelines for the deinkability potential of printed matter
20.60
ISO/WD TS 21400
Determination of Cellulose Nanocrystal Sulfur and Sulfate Half-Ester Content
20.20
ISO/AWI 21436
Pulps -- Determination of lignin content -- Acid hydrolysis method
20.00
ISO/AWI 21437
Pulps -Determination of carbohydrate composition
20.00
ISO/WD 21896
Paper and board -- Recycled paper -- Determination of discoloration of printed paper
20.20
ISO/CD 21993
Paper and Pulp -- Deinkability test for printed paper products
30.00 85.080.01
85.060
85.040
ISO 22754:2008
Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
90.20 85.040
85.060
ISO 22891:2013
Paper -- Determination of transmittance by diffuse reflectance measurement
60.60 85.060
ISO 23713:2005
Pulps -- Determination of fibre coarseness by automated optical analysis -- Polarized light method
90.93 85.040
ISO 23714:2014
Pulps -- Determination of water retention value (WRV)
60.60 85.040
ISO/TR 24498:2006
Paper, board and pulps -- Estimation of uncertainty for test methods
90.92 85.060
85.040
ISO/WD TR 24498
Paper, board and pulps -- Estimation of uncertainty for test methods
20.60 85.060
85.040
ISO/TR 25477:2008
Paper, board and pulps - Basic guidelines for image analysis measurements
60.60 85.060
85.040
ISO 29681:2009
Paper, board and pulps -- Determination of pH of salted water extracts
90.93 85.040