Home

Standards catalogue

Subscribe to updates

ISO/TC 2  - Fasteners

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 2 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 225:2010
Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions
60.60 21.060.10ISO/TC 2/SC 7
ISO 272:1982
Fasteners -- Hexagon products -- Widths across flats
90.93 21.060.01ISO/TC 2/SC 7
ISO 273:1979
Fasteners -- Clearance holes for bolts and screws
90.93 21.060.01ISO/TC 2/SC 7
ISO 885:2000
General purpose bolts and screws -- Metric series -- Radii under the head
90.93 21.060.10ISO/TC 2/SC 7
ISO 887:2000
Plain washers for metric bolts, screws and nuts for general purposes -- General plan
90.93 21.060.30ISO/TC 2
ISO 887:2000/Cor 1:2006
60.60 21.060.30ISO/TC 2
ISO 888:2012
Fasteners -- Bolts, screws and studs -- Nominal lengths and thread lengths
60.60 21.060.10ISO/TC 2/SC 7
ISO 898-1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
60.60 21.060.10ISO/TC 2/SC 11
ISO 898-1:2013/Cor 1:2013
60.60 21.060.10ISO/TC 2/SC 11
ISO 898-2:2012
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 2: Nuts with specified property classes -- Coarse thread and fine pitch thread
90.92 21.060.20ISO/TC 2/SC 12
ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners with specified hardness classes -- Coarse thread and fine pitch thread
60.60 21.060.10ISO/TC 2/SC 11
ISO 898-7:1992
Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
90.93 21.060.10ISO/TC 2/SC 11
ISO 1051:1999
Rivet shank diameters
90.93 21.060.40ISO/TC 2
ISO 1207:2011
Slotted cheese head screws -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 1234:1997
Split pins
90.93 21.060.50ISO/TC 2
ISO 1478:1999
Tapping screws thread
90.60 21.040.30ISO/TC 2/SC 13
ISO 1479:2011
Hexagon head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 1481:2011
Slotted pan head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 1482:2011
Slotted countersunk (flat) head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 1483:2011
Slotted raised countersunk (oval) head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 1580:2011
Slotted pan head screws -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 1891:2009
Fasteners -- Terminology
90.60 01.040.21
21.060.01
ISO/TC 2/SC 7
ISO 2009:2011
Slotted countersunk flat head screws -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 2010:2011
Slotted raised countersunk head screws -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 2320:2008
Prevailing torque type steel nuts -- Mechanical and performance properties
90.92 21.060.20ISO/TC 2/SC 12
ISO 2338:1997
Parallel pins, of unhardened steel and austenitic stainless steel
90.93 21.060.50ISO/TC 2
ISO 2339:1986
Taper pins, unhardened
90.93 21.060.50ISO/TC 2
ISO 2340:1986
Clevis pins without head
90.93 21.060.50ISO/TC 2
ISO 2341:1986
Clevis pins with head
90.93 21.060.50ISO/TC 2
ISO 2342:2003
Slotted headless screws with shank
90.93 21.060.10ISO/TC 2/SC 11
ISO 2702:2011
Heat-treated steel tapping screws -- Mechanical properties
60.60 21.060.10ISO/TC 2/SC 13
ISO 3269:2000
Fasteners -- Acceptance inspection
90.92 21.060.01ISO/TC 2/SC 7
ISO 3506-1:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
90.92 21.060.10ISO/TC 2
ISO 3506-2:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts
90.92 21.060.20ISO/TC 2
ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
60.60 21.060.10ISO/TC 2
ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws
60.60 21.060.10ISO/TC 2
ISO 3508:1976
Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
90.93 21.060.01ISO/TC 2/SC 7
ISO 3800:1993
Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results
90.93 21.060.01ISO/TC 2/SC 11
ISO 4014:2011
Hexagon head bolts -- Product grades A and B
60.60 21.060.10ISO/TC 2/SC 11
ISO 4015:1979
Hexagon head bolts -- Product grade B -- Reduced shank (shank diameter approximately equal to pitch diameter)
90.93 21.060.10ISO/TC 2/SC 11
ISO 4016:2011
Hexagon head bolts -- Product grade C
60.60 21.060.10ISO/TC 2/SC 11
ISO 4017:2014
Fasteners -- Hexagon head screws -- Product grades A and B
60.60 21.060.10ISO/TC 2/SC 11
ISO 4018:2011
Hexagon head screws -- Product grade C
60.60 21.060.10ISO/TC 2/SC 11
ISO 4026:2003
Hexagon socket set screws with flat point
90.93 21.060.10ISO/TC 2/SC 11
ISO 4027:2003
Hexagon socket set screws with cone point
90.93 21.060.10ISO/TC 2/SC 11
ISO 4028:2003
Hexagon socket set screws with dog point
90.93 21.060.10ISO/TC 2/SC 11
ISO 4029:2003
Hexagon socket set screws with cup point
90.93 21.060.10ISO/TC 2/SC 11
ISO 4032:2012
Hexagon regular nuts (style 1) -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 4033:2012
Hexagon high nuts (style 2) -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 4034:2012
Hexagon regular nuts (style 1) -- Product grade C
90.92 21.060.20ISO/TC 2/SC 12
ISO 4034:2012/Cor 1:2013
60.60 21.060.20ISO/TC 2/SC 12
ISO 4035:2012
Hexagon thin nuts chamfered (style 0) -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 4036:2012
Hexagon thin nuts unchamfered (style 0) -- Product grade B
90.92 21.060.20ISO/TC 2/SC 12
ISO 4042:1999
Fasteners -- Electroplated coatings
90.92 21.060.01ISO/TC 2/SC 14
ISO 4161:2012
Hexagon nuts with flange, style 2 -- Coarse thread
90.92 21.060.20ISO/TC 2/SC 12
ISO 4162:2012
Hexagon bolts with flange -- Small series -- Product grade A with driving feature of product grade B
60.60 21.060.10ISO/TC 2/SC 11
ISO 4753:2011
Fasteners -- Ends of parts with external ISO metric thread
60.60 21.060.01ISO/TC 2/SC 7
ISO 4755:1983
Fasteners -- Thread undercuts for external metric ISO threads
90.93 21.060.01ISO/TC 2/SC 7
ISO 4757:1983
Cross recesses for screws
90.93 21.060.10ISO/TC 2/SC 13
ISO 4759-1:2000
Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
90.93 21.060.10
21.060.20
ISO/TC 2/SC 7
ISO 4759-3:2000
Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C
90.92 21.060.30ISO/TC 2
ISO 4762:2004
Hexagon socket head cap screws
90.93 21.060.10ISO/TC 2/SC 11
ISO 4766:2011
Slotted set screws with flat point
60.60 21.060.10ISO/TC 2/SC 11
ISO 6157-1:1988
Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
90.92 21.060.10ISO/TC 2/SC 7
ISO 6157-2:1995
Fasteners -- Surface discontinuities -- Part 2: Nuts
90.93 21.060.20ISO/TC 2/SC 7
ISO 6157-3:1988
Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements
90.93 21.060.10ISO/TC 2/SC 7
ISO 7040:2012
Prevailing torque type hexagon regular nuts (with non-metallic insert) -- Property classes 5, 8 and 10
90.92 21.060.20ISO/TC 2/SC 12
ISO 7041:2012
Prevailing torque type hexagon nuts (with non-metallic insert), style 2 -- Property classes 9 and 12
90.92 21.060.20ISO/TC 2/SC 12
ISO 7042:2012
Prevailing torque type all-metal hexagon high nuts -- Property classes 5, 8, 10 and 12
90.92 21.060.20ISO/TC 2/SC 12
ISO 7043:2012
Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 7044:2012
Prevailing torque type all-metal hexagon nuts with flange, style 2 -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 7045:2011
Pan head screws with type H or type Z cross recess -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 7046-1:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 1: Steel screws of property class 4.8
60.60 21.060.10ISO/TC 2/SC 11
ISO 7046-2:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 7047:2011
Raised countersunk head screws (common head style) with type H or type Z cross recess -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 7048:2011
Cross-recessed cheese head screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 7049:2011
Cross-recessed pan head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 7050:2011
Cross-recessed countersunk (flat) head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 7051:2011
Cross-recessed raised countersunk (oval) head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 7053:2011
Hexagon washer head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 7089:2000
Plain washers -- Normal series -- Product grade A
90.93 21.060.30ISO/TC 2
ISO 7090:2000
Plain washers, chamfered -- Normal series -- Product grade A
90.93 21.060.30ISO/TC 2
ISO 7091:2000
Plain washers -- Normal series -- Product grade C
90.93 21.060.30ISO/TC 2
ISO 7092:2000
Plain washers -- Small series -- Product grade A
90.93 21.060.30ISO/TC 2
ISO 7093-1:2000
Plain washers -- Large series -- Part 1: Product grade A
90.93 21.060.30ISO/TC 2
ISO 7093-2:2000
Plain washers -- Large series -- Part 2: Product grade C
90.93 21.060.30ISO/TC 2
ISO 7094:2000
Plain washers -- Extra large series -- Product grade C
90.93 21.060.30ISO/TC 2
ISO 7094:2000/Cor 1:2000
60.60 21.060.30ISO/TC 2
ISO 7378:1983
Fasteners -- Bolts, screws and studs -- Split pin holes and wire holes
90.93 21.060.10ISO/TC 2/SC 7
ISO 7379:1983
Hexagon socket head shoulder screws
90.93 21.060.10ISO/TC 2/SC 11
ISO 7380-1:2011
Button head screws -- Part 1: Hexagon socket button head screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 7380-2:2011
Button head screws -- Part 2: Hexagon socket button head screws with collar
60.60 21.060.10ISO/TC 2/SC 11
ISO 7434:1983
Slotted set screws with cone point
90.60 21.060.10ISO/TC 2/SC 11
ISO 7435:1983
Slotted set screws with long dog point
90.60 21.060.10ISO/TC 2/SC 11
ISO 7436:1983
Slotted set screws with cup point
90.60 21.060.10ISO/TC 2/SC 11
ISO 7719:2012
Prevailing torque type all-metal hexagon regular nuts -- Property classes 5, 8 and 10
90.92 21.060.20ISO/TC 2/SC 12
ISO 7719:2012/Cor 1:2013
60.60 21.060.20ISO/TC 2/SC 12
ISO 7720:2012
Prevailing torque type all-metal hexagon nuts, style 2 -- Property class 9
90.92 21.060.20ISO/TC 2/SC 12
ISO 7721:1983
Countersunk head screws -- Head configuration and gauging
90.60 21.060.10ISO/TC 2/SC 11
ISO 7721-2:1990
Countersunk flat head screws -- Part 2: Penetration depth of cross recesses
90.60 21.060.10ISO/TC 2/SC 11
ISO 8673:2012
Hexagon regular nuts (style 1) with metric fine pitch thread -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 8674:2012
Hexagon high nuts (style 2) with metric fine pitch thread -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 8675:2012
Hexagon thin nuts chamfered (style 0) with metric fine pitch thread -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 8676:2011
Hexagon head screws with metric fine pitch thread -- Product grades A and B
60.60 21.060.10ISO/TC 2/SC 11
ISO 8678:1988
Cup head square neck bolts with small head and short neck -- Product grade B
90.93 21.060.10ISO/TC 2/SC 11
ISO 8733:1997
Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
90.93 21.060.50ISO/TC 2
ISO 8734:1997
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
90.93 21.060.50ISO/TC 2
ISO 8735:1997
Parallel pins with internal thread, of hardened steel and martensitic stainless steel
90.93 21.060.50ISO/TC 2
ISO 8736:1986
Taper pins with internal thread, unhardened
90.93 21.060.50ISO/TC 2
ISO 8737:1986
Taper pins with external thread, unhardened
90.93 21.060.50ISO/TC 2
ISO 8738:1986
Plain washers for clevis pins -- Product grade A
90.93 21.060.30ISO/TC 2
ISO 8739:1997
Grooved pins -- Full-length parallel grooved, with pilot
90.93 21.060.50ISO/TC 2
ISO 8740:1997
Grooved pins -- Full-length parallel grooved, with chamfer
90.93 21.060.50ISO/TC 2
ISO 8741:1997
Grooved pins -- Half-length reverse-taper grooved
90.93 21.060.50ISO/TC 2
ISO 8742:1997
Grooved pins -- One-third-length centre grooved
90.93 21.060.50ISO/TC 2
ISO 8743:1997
Grooved pins -- Half-length centre grooved
90.93 21.060.50ISO/TC 2
ISO 8744:1997
Grooved pins -- Full-length taper grooved
90.93 21.060.50ISO/TC 2
ISO 8745:1997
Grooved pins -- Half-length taper grooved
90.93 21.060.50ISO/TC 2
ISO 8746:1997
Grooved pins with round head
90.93 21.060.50ISO/TC 2
ISO 8747:1997
Grooved pins with countersunk head
90.93 21.060.50ISO/TC 2
ISO 8748:2007
Spring-type straight pins -- Coiled, heavy duty
90.93 21.060.50ISO/TC 2
ISO 8749:1986
Pins and grooved pins -- Shear test
90.93 21.060.50ISO/TC 2
ISO 8750:2007
Spring-type straight pins -- Coiled, standard duty
90.93 21.060.50ISO/TC 2
ISO 8751:2007
Spring-type straight pins -- Coiled, light duty
90.93 21.060.50ISO/TC 2
ISO 8752:2009
Spring-type straight pins -- Slotted, heavy duty
90.60 21.060.50ISO/TC 2
ISO 8765:2011
Hexagon head bolts with metric fine pitch thread -- Product grades A and B
60.60 21.060.10ISO/TC 2/SC 11
ISO 8839:1986
Mechanical properties of fasteners -- Bolts, screws, studs and nuts made of non-ferrous metals
90.60 21.060.10
21.060.20
ISO/TC 2/SC 11
ISO 8991:1986
Designation system for fasteners
90.93 21.060.01ISO/TC 2/SC 7
ISO 8992:2005
Fasteners -- General requirements for bolts, screws, studs and nuts
90.93 21.060.10
21.060.20
ISO/TC 2/SC 7
ISO 10484:1997
Widening test on nuts
90.92 21.060.20ISO/TC 2/SC 12
ISO 10509:2012
Hexagon flange head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 10510:2011
Tapping screw and washer assemblies with plain washers
60.60 21.060.10ISO/TC 2/SC 13
ISO 10511:2012
Prevailing torque type hexagon thin nuts (with non-metallic insert)
90.92 21.060.20ISO/TC 2/SC 12
ISO 10512:2012
Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread -- Property classes 6, 8 and 10
90.92 21.060.20ISO/TC 2/SC 12
ISO 10513:2012
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread -- Property classes 8, 10 and 12
90.92 21.060.20ISO/TC 2/SC 12
ISO 10642:2004
Hexagon socket countersunk head screws
90.92 21.060.10ISO/TC 2/SC 11
ISO 10642:2004/Amd 1:2012
60.60 21.060.10ISO/TC 2/SC 11
ISO 10644:2009
Screw and washer assemblies made of steel with plain washers -- Washer hardness classes 200 HV and 300 HV
90.60 21.060.30ISO/TC 2/SC 11
ISO 10663:2012
Hexagon nuts with flange, style 2 -- Fine pitch thread
90.92 21.060.20ISO/TC 2/SC 12
ISO 10664:2005
Hexalobular internal driving feature for bolts and screws
90.92 21.060.10ISO/TC 2/SC 11
ISO 10666:1999
Drilling screws with tapping screw thread -- Mechanical and functional properties
90.60 21.060.10ISO/TC 2/SC 13
ISO 10669:1999
Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A
90.60 21.060.30ISO/TC 2
ISO 10673:2009
Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A
90.60 21.060.30ISO/TC 2/SC 11
ISO 10683:2014
Fasteners -- Non-electrolytically applied zinc flake coatings
60.60 21.060.01
25.220.40
ISO/TC 2/SC 14
ISO 10684:2004
Fasteners -- Hot dip galvanized coatings
90.93 21.060.01
25.220.40
ISO/TC 2/SC 14
ISO 10684:2004/Cor 1:2008
60.60 25.220.40
21.060.01
ISO/TC 2/SC 14
ISO 12125:2012
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 12126:2012
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 -- Product grades A and B
90.92 21.060.20ISO/TC 2/SC 12
ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread
60.60 21.060.10ISO/TC 2/SC 11
ISO 13337:2009
Spring-type straight pins -- Slotted, light duty
90.60 21.060.50ISO/TC 2
ISO 14579:2011
Hexalobular socket head cap screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 14580:2011
Hexalobular socket cheese head screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 14581:2013
Fasteners -- Hexalobular socket countersunk flat head screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 14582:2013
Fasteners -- Hexalobular socket countersunk head screws, high head
60.60 21.060.10ISO/TC 2/SC 11
ISO 14583:2011
Hexalobular socket pan head screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 14584:2011
Hexalobular socket raised countersunk head screws
60.60 21.060.10ISO/TC 2/SC 11
ISO 14585:2011
Hexalobular socket pan head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 14586:2011
Hexalobular socket countersunk head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws
60.60 21.060.10ISO/TC 2/SC 13
ISO 14588:2000
Blind rivets -- Terminology and definitions
90.93 21.060.40
01.040.21
ISO/TC 2
ISO 14589:2000
Blind rivets -- Mechanical testing
90.93 21.060.40ISO/TC 2
ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
90.93 21.060.10ISO/TC 2/SC 7
ISO 15071:2011
Hexagon bolts with flange -- Small series -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 15072:2012
Hexagon bolts with flange with metric fine pitch thread -- Small series -- Product grade A
60.60 21.060.10ISO/TC 2/SC 11
ISO 15330:1999
Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method
90.93 21.060.01ISO/TC 2/SC 14
ISO 15480:1999
Hexagon washer head drilling screws with tapping screw thread
90.60 21.060.10ISO/TC 2/SC 13
ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread
90.60 21.060.10ISO/TC 2/SC 13
ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread
90.60 21.060.10ISO/TC 2/SC 13
ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread
90.60 21.060.10ISO/TC 2/SC 13
ISO 15973:2000
Closed end blind rivets with break pull mandrel and protruding head -- AlA/St
90.93 21.060.40ISO/TC 2
ISO 15974:2000
Closed end blind rivets with break pull mandrel and countersunk head -- AlA/St
90.93 21.060.40ISO/TC 2
ISO 15975:2002
Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA
90.93 21.060.40ISO/TC 2
ISO 15976:2002
Closed end blind rivets with break pull mandrel and protruding head -- St/St
90.93 21.060.40ISO/TC 2
ISO 15977:2002
Open end blind rivets with break pull mandrel and protruding head -- AIA/St
90.93 21.060.40ISO/TC 2
ISO 15978:2002
Open end blind rivets with break pull mandrel and countersunk head -- AIA/St
90.93 21.060.40ISO/TC 2
ISO 15979:2002
Open end blind rivets with break pull mandrel and protruding head -- St/St
90.93 21.060.40ISO/TC 2
ISO 15980:2002
Open end blind rivets with break pull mandrel and countersunk head -- St/St
90.93 21.060.40ISO/TC 2
ISO 15981:2002
Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA
90.93 21.060.40ISO/TC 2
ISO 15982:2002
Open end blind rivets with break pull mandrel and countersunk head -- AIA/AIA
90.93 21.060.40ISO/TC 2
ISO 15983:2002
Open end blind rivets with break pull mandrel and protruding head -- A2/A2
90.93 21.060.40ISO/TC 2
ISO 15984:2002
Open end blind rivets with break pull mandrel and countersunk head -- A2/A2
90.93 21.060.40ISO/TC 2
ISO 16047:2005
Fasteners -- Torque/clamp force testing
90.93 21.060.01ISO/TC 2/SC 11
ISO 16047:2005/Amd 1:2012
60.60 21.060.01ISO/TC 2/SC 11
ISO 16048:2003
Passivation of corrosion-resistant stainless-steel fasteners
90.92 21.060.01ISO/TC 2
ISO/TR 16224:2012
Technical aspects of nut design
60.60 21.060.20ISO/TC 2/SC 12
ISO 16426:2002
Fasteners -- Quality assurance system
90.93 21.060.01ISO/TC 2/SC 7
ISO 16582:2002
Open end blind rivets with break pull mandrel and protruding head -- Cu/St or Cu/Br or Cu/SSt
90.93 21.060.40ISO/TC 2
ISO 16583:2002
Open end blind rivets with break pull mandrel and countersunk head -- Cu/St or Cu/Br or Cu/SSt
90.93 21.060.40ISO/TC 2
ISO 16584:2002
Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt
90.93 21.060.40ISO/TC 2
ISO 16585:2002
Closed end blind rivets with pull mandrel and protruding head -- A2/SSt
90.93 21.060.40ISO/TC 2
ISO 21670:2014
Fasteners -- Hexagon weld nuts with flange
60.60 21.060.20ISO/TC 2/SC 12
ISO 23429:2004
Gauging of hexagon sockets
90.93 21.060.10ISO/TC 2/SC 11