Home

Standards catalogue

Subscribe to updates

ISO/TC 226  - Materials for the production of primary aluminium

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 226 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 802:1976
Aluminium oxide primarily used for the production of aluminium -- Preparation and storage of test samples
90.93 71.100.10ISO/TC 226
ISO 804:1976
Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by alkaline fusion
90.20 71.100.10ISO/TC 226
ISO 805:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of iron content -- 1,10- Phenanthroline photometric method
90.93 71.100.10ISO/TC 226
ISO 806:2004
Aluminium oxide primarily used for the production of aluminium -- Determination of loss of mass at 300 degrees C and 1 000 degrees C
90.93 71.100.10ISO/TC 226
ISO 900:1977
Aluminium oxide primarily used for the production of aluminium -- Determination of titanium content -- Diantipyrylmethane photometric method
90.93 71.100.10ISO/TC 226
ISO 901:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
90.20 71.100.10ISO/TC 226
ISO 902:1976
Aluminium oxide primarily used for the production of aluminium -- Measurement of the angle of repose
90.20 71.100.10ISO/TC 226
ISO 903:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of untamped density
90.93 71.100.10ISO/TC 226
ISO 1232:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
90.93 71.100.10ISO/TC 226
ISO 1617:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of sodium content -- Flame emission spectrophotometric method
90.93 71.100.10ISO/TC 226
ISO 1618:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of vanadium content -- N-Benzoyl-N-phenylhydroxylamine photometric method
90.93 71.100.10ISO/TC 226
ISO 1619:1976
Cryolite, natural and artificial -- Preparation and storage of test samples
90.20 71.060.50ISO/TC 226
ISO 1620:1976
Cryolite, natural and artificial -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
90.20 71.060.50ISO/TC 226
ISO 1693:1976
Cryolite, natural and artificial -- Determination of fluorine content -- Modified Willard-Winter method
90.93 71.060.50ISO/TC 226
ISO 1694:1976
Cryolite, natural and artificial -- Determination of iron content -- 1,10- Phenanthroline photometric method
90.93 71.060.50ISO/TC 226
ISO 2069:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content -- Flame atomic absorption method
90.93 71.100.10ISO/TC 226
ISO 2070:1997
Aluminium oxide primarily used for the production of aluminium -- Determination of calcium content
90.93 71.100.10ISO/TC 226
ISO 2071:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- Flame atomic absorption method
90.93 71.100.10ISO/TC 226
ISO 2072:1981
Aluminium oxide primarily used for the production of aluminium -- Determination of zinc content -- PAN photometric method
90.93 71.100.10ISO/TC 226
ISO 2073:1976
Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by hydrochloric acid attack under pressure
90.20 71.100.10ISO/TC 226
ISO 2366:1974
Cryolite, natural and artificial -- Determination of sodium content -- Flame emission and atomic absorption spectrophotometric methods
90.93 71.060.50ISO/TC 226
ISO 2367:1972
Cryolite (natural and artificial) -- Determination of aluminium content -- 8- Hydroxyquinoline gravimetric method
90.20 71.060.50ISO/TC 226
ISO 2828:1973
Aluminium oxide primarily used for the production of aluminium -- Determination of fluorine content -- Alizarin complexone and lanthanum chloride spectrophotometric method
90.93 71.100.10ISO/TC 226
ISO 2829:1973
Aluminium oxide primarily used for the production of aluminium -- Determination of phosphorus content -- Reduced phosphomolybdate spectrophotometric method
90.93 71.100.10ISO/TC 226
ISO 2830:1973
Cryolite, natural and artificial -- Determination of aluminium content -- Atomic absorption method
90.93 71.060.50ISO/TC 226
ISO 2865:1973
Aluminium oxide primarily used for the production of aluminium -- Determination of boron content -- Curcumin spectrophotometric method
90.93 71.100.10ISO/TC 226
ISO 2865:1973/Cor 1:1991
60.60 71.100.10ISO/TC 226
ISO 2926:2013
Aluminium oxide used for the production of primary aluminium -- Particle size analysis for the range 45 µm to 150 µm -- Method using electroformed sieves
60.60 71.100.10ISO/TC 226
ISO 2927:1973
Aluminium oxide primarily used for the production of aluminium -- Sampling
90.93 71.100.10ISO/TC 226
ISO 2961:1974
Aluminium oxide primarily used for the production of aluminium -- Determination of an adsorption index
90.20 71.100.10ISO/TC 226
ISO 3390:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of manganese content -- Flame atomic absorption method
90.93 71.100.10ISO/TC 226
ISO 3391:1976
Cryolite, natural and artificial -- Determination of calcium content -- Flame atomic absorption method
90.93 71.060.50ISO/TC 226
ISO 3393:1976
Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of moisture content -- Gravimetric method
90.20 71.060.50ISO/TC 226
ISO 3429:1976
Sodium fluoride primarily used for the production of aluminium -- Determination of iron content -- 1,10- Phenanthroline photometric method
90.93 71.100.10ISO/TC 226
ISO 3430:1976
Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
90.93 71.100.10ISO/TC 226
ISO 3431:1976
Sodium fluoride primarily used for the production of aluminium -- Determination of soluble sulphates content -- Turbidimetric method
90.93 71.100.10ISO/TC 226
ISO 3566:1976
Sodium fluoride primarily used for the production of aluminium -- Determination of chlorides content -- Turbidimetric method
90.20 71.100.10ISO/TC 226
ISO 3699:1976
Anhydrous hydrogen fluoride for industrial use -- Determination of water content -- Karl Fischer method
90.20 71.060.30ISO/TC 226
ISO/TR 4277:2009
Cryolite, natural and artificial -- Conventional test for evaluation of free fluorides content
60.60 71.060.50ISO/TC 226
ISO 4280:1977
Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of sulphate content -- Barium sulphate gravimetric method
90.93 71.060.50ISO/TC 226
ISO 5930:1979
Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of phosphorus content -- Reduced molybdophosphate photometric method
90.93 71.060.50ISO/TC 226
ISO 5931:2000
Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method
90.93 71.100.10ISO/TC 226
ISO 5938:1979
Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of sulphur content -- X-ray fluorescence spectrometric method
90.93 71.060.50ISO/TC 226
ISO 5939:1980
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of water content -- Azeotropic distillation (Dean and Stark) method
90.20 71.100.10ISO/TC 226
ISO 5940:1981
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of softening point by the ring-and-ball method
90.20 71.100.10ISO/TC 226
ISO 5940-2:2007
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Part 2: Determination of the softening point (Mettler softening point method)
90.93 71.100.10ISO/TC 226
ISO 6257:2002
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Sampling
90.93 71.100.10ISO/TC 226
ISO 6374:1981
Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of phosphorus content -- Atomic absorption spectrometric method after extraction
90.93 71.060.50ISO/TC 226
ISO 6375:1980
Carbonaceous materials for the production of aluminium -- Coke for electrodes -- Sampling
90.20 71.100.10ISO/TC 226
ISO 6376:1980
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of content of toluene-insoluble material
90.20 71.100.10ISO/TC 226
ISO 6791:1981
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material
90.20 71.100.10ISO/TC 226
ISO 6997:1985
Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of apparent oil content -- Heating method
90.20 71.100.10ISO/TC 226
ISO 6998:1997
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of coking value
90.20 71.100.10ISO/TC 226
ISO 6998:1997/Cor 1:1999
60.60 71.100.10ISO/TC 226
ISO 6999:1983
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of density -- Pycnometric method
90.93 71.100.10ISO/TC 226
ISO 8003:1985
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity
90.20 71.100.10ISO/TC 226
ISO 8004:1985
Carbonaceous materials for the production of aluminium -- Calcined coke and calcined carbon products -- Determination of the density in xylene -- Pyknometric method
90.20 71.100.10ISO/TC 226
ISO 8005:2005
Carbonaceous materials used in the production of aluminium -- Green and calcined coke -- Determination of ash content
90.20 71.100.10ISO/TC 226
ISO 8006:1985
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash
90.20 71.100.10ISO/TC 226
ISO 8007-1:1999
Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 1: Cathode blocks
90.93 71.100.10ISO/TC 226
ISO 8007-2:1999
Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 2: Prebaked anodes
90.93 71.100.10ISO/TC 226
ISO 8007-3:2003
Carbonaceous materials used in the production of aluminium -- Sampling plans and sampling from individual units -- Part 3: Sidewall blocks
90.20 71.100.10ISO/TC 226
ISO 8008:2005
Aluminium oxide primarily used for the production of aluminium -- Determination of specific surface area by nitrogen adsorption
90.20 71.100.10ISO/TC 226
ISO 8220:1986
Aluminium oxide primarily used for the production of aluminium -- Determination of the fine particle size distribution (less than 60 mu/m) -- Method using electroformed sieves
90.93 71.100.10ISO/TC 226
ISO 8658:1997
Carbonaceous materials for use in the production of aluminium -- Green and calcined coke -- Determination of trace elements by flame atomic absorption spectrometry
90.93 71.100.10ISO/TC 226
ISO 8723:1986
Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of oil content -- Method by solvent extraction
90.20 71.100.10ISO/TC 226
ISO 9055:1988
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method
90.93 71.100.10ISO/TC 226
ISO 9088:1997
Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method
90.20 71.100.10ISO/TC 226
ISO 9406:1995
Carbonaceous materials for the production of aluminium -- Green coke -- Determination of volatile matter content by gravimetric analysis
90.93 71.100.10ISO/TC 226
ISO 10142:1996
Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of grain stability using a laboratory vibration mill
90.93 71.100.10ISO/TC 226
ISO 10143:1995
Carbonaceous materials for the production of aluminium -- Calcined coke for electrodes -- Determination of the electrical resistivity of granules
90.92 71.100.10ISO/TC 226
ISO 10236:1995
Carbonaceous materials for the production of aluminium -- Green coke and calcined coke for electrodes -- Determination of bulk density (tapped)
90.93 71.100.10ISO/TC 226
ISO 10237:1997
Carbonaceous materials for use in the production of aluminium -- Calcined coke -- Determination of residual-hydrogen content
90.20 71.100.10ISO/TC 226
ISO 10238:1999
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method
90.93 71.100.10ISO/TC 226
ISO 11412:1998
Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of water content
90.20 71.100.10ISO/TC 226
ISO 11706:2012
Carbonaceous materials for the production of aluminium -- Prebaked anodes -- Determination of the fracture energy
60.60 71.100.10ISO/TC 226
ISO 11713:2000
Carbonaceous materials used in the production of aluminium -- Cathode blocks and baked anodes -- Determination of electrical resistivity at ambient temperature
90.93 71.100.10ISO/TC 226
ISO 12315:2010
Aluminium oxide primarily used for production of aluminium -- Method for calculating the Al2O3 content of smelter-grade alumina
60.60 71.100.10ISO/TC 226
ISO 12926:2012
Aluminium fluoride for industrial use -- Determination of trace elements -- Wavelength dispersive X-ray fluorescence spectrometric method using pressed powder tablets
60.60 71.100.10ISO/TC 226
ISO 12977:1999
Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content
90.93 71.100.10ISO/TC 226
ISO 12979:1999
Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction
90.93 71.100.10ISO/TC 226
ISO 12980:2000
Carbonaceous materials used in the production of aluminium -- Green coke and calcined coke for electrodes -- Analysis using an X-ray fluorescence method
90.60 71.100.10ISO/TC 226
ISO 12981-1:2000
Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
90.60 71.100.10ISO/TC 226
ISO 12982-1:2000
Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of the reactivity to air -- Part 1: Ignition temperature method
90.60 71.100.10ISO/TC 226
ISO 12984:2000
Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of particle size distribution
90.60 71.100.10ISO/TC 226
ISO 12985-1:2000
Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 1: Determination of apparent density using a dimensions method
90.60 71.100.10ISO/TC 226
ISO 12985-2:2000
Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 2: Determination of apparent density and of open porosity using a hydrostatic method
90.60 71.100.10ISO/TC 226
ISO 12986-1:2000
Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 1: Determination of bending/shear strength by a three-point method
90.92 71.100.10ISO/TC 226
ISO 12986-2:2009
Carbonaceous materials used in the production of aluminium -- Prebaked anodes and cathode blocks -- Part 2: Determination of flexural strength by the four-point method
90.92 71.100.10ISO/TC 226
ISO 12987:2004
Carbonaceous materials for the production of aluminium -- Anodes, cathodes blocks, sidewall blocks and baked ramming pastes -- Determination of the thermal conductivity using a comparative method
90.93 71.100.10ISO/TC 226
ISO 12988-1:2000
Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 1: Loss in mass method
90.60 71.100.10ISO/TC 226
ISO 12988-2:2004
Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 2: Thermogravimetric method
90.93 71.100.10ISO/TC 226
ISO 12989-1:2000
Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 1: Loss in mass method
90.93 71.100.10ISO/TC 226
ISO 12989-2:2004
Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 2: Thermogravimetric method
90.93 71.100.10ISO/TC 226
ISO 14420:2005
Carbonaceous products for the production of aluminium -- Baked anodes and shaped carbon products -- Determination of the coefficient of linear thermal expansion
90.20 71.100.10ISO/TC 226
ISO 14422:1999
Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Methods of sampling
90.93 71.100.10ISO/TC 226
ISO/TS 14423:1999
Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
90.93 71.100.10ISO/TC 226
ISO/TS 14425:1999
Carbonaceous materials used in the production of aluminium -- Cold-ramming pastes -- Determination of volatile-matter content of unbaked pastes
90.93 71.100.10ISO/TC 226
ISO 14427:2004
Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of unbaked test specimens and determination of apparent density after compaction
90.93 71.100.10ISO/TC 226
ISO 14428:2005
Carbonaceous materials for the production of aluminium -- Cold and tepid ramming pastes -- Expansion/shrinkage during baking
90.20 71.100.10ISO/TC 226
ISO 14435:2005
Carbonaceous materials for the production of aluminium -- Petroleum coke -- Determination of trace metals by inductively coupled plasma atomic emission spectrometry
90.20 71.100.10ISO/TC 226
ISO 15379-1:2004
Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 1: Determination of the expansion due to sodium penetration with application of pressure
90.60 71.100.10ISO/TC 226
ISO 15379-2:2004
Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 2: Determination of the expansion due to sodium penetration without application of pressure
90.60 71.100.10ISO/TC 226
ISO 15906:2007
Carbonaceous materials for the production of aluminium -- Baked anodes -- Determination of the air permeability
90.93 71.100.10ISO/TC 226
ISO 17499:2006
Carbonaceous materials used in the production of aluminium -- Determination of baking level expressed by equivalent temperature
90.93 71.100.10ISO/TC 226
ISO 17500:2006
Aluminium oxide used for the production of primary aluminium -- Determination of attrition index
90.93 71.100.10ISO/TC 226
ISO 17544:2004
Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Determination of rammability of unbaked pastes
90.93 71.100.10ISO/TC 226
ISO 18142:2014
Carbonaceous materials for the production of primary aluminium -- Baked carbon bodies -- Determination of the dynamic elasticity modulus by the resonance method
60.60 71.100.10ISO/TC 226
ISO 18515:2007
Carbonaceous materials for the production of aluminium -- Cathode blocks and baked anodes -- Determination of compressive strength
90.92 71.100.10ISO/TC 226
ISO 20202:2004
Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of baked test pieces and determination of loss on baking
90.93 71.100.10ISO/TC 226
ISO 20203:2005
Carbonaceous materials used in the production of aluminium -- Calcined coke -- Determination of crystallite size of calcined petroleum coke by X-ray diffraction
90.20 77.120.10ISO/TC 226
ISO 20292:2009
Materials for the production of primary aluminium -- Dense refractory bricks -- Determination of cryolite resistance
90.20 71.100.10
71.060.50
ISO/TC 226
ISO 21687:2007
Carbonaceous materials used in the production of aluminium -- Determination of density by gas pyknometry (volumetric) using helium as the analysis gas -- Solid materials
90.93 71.100.10ISO/TC 226
ISO 23202:2006
Aluminium oxide used for the production of aluminium -- Determination of particles passing a 20 micrometre aperture sieve
90.93 71.100.10ISO/TC 226