Internal drainage systems, see 91.140.80
Sewage water disposal and treatment, see 13.060.30
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U) | 90.93 | ISO/TC 138/SC 1 |
| ISO/TR 7073:1988 Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers | 90.93 | ISO/TC 138/SC 1 |
| ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage | 90.93 | ISO/TC 138/SC 1 |
| ISO 7186:2011 Ductile iron products for sewerage applications | 60.60 | ISO/TC 5/SC 2 |
| ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) | 90.93 | ISO/TC 138/SC 1 |
| ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.20 | ISO/TC 138/SC 6 |
| ISO 10467:2004/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO 11296-3:2009/Cor 1:2011 | 60.60 | ISO/TC 138 |
| ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes | 60.60 | ISO/TC 138 |
| ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes | 60.60 | ISO/TC 138 |
| ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11297-3 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes | 60.00 | ISO/TC 138 |
| ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading | 60.60 | ISO/TC 138/SC 1 |
| ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam | 60.60 | ISO/TC 138/SC 1 |
| ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength | 60.60 | ISO/TC 138/SC 1 |
| ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings | 60.60 | ISO/TC 138/SC 1 |
| ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure | 60.60 | ISO/TC 138/SC 1 |
| ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading | 60.60 | ISO/TC 138/SC 1 |
| ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance | 60.60 | ISO/TC 138/SC 1 |
| ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness | 60.60 | ISO/TC 138/SC 1 |
| ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations | 60.60 | ISO/TC 138/SC 1 |
| ISO/WD 16611 Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests | 20.99 | ISO/TC 138/SC 6 |
| ISO/CD 17902 Wrapped electrofusion jointed systems for solid wall and structured wall piping systems for gravity drains and sewers | 30.60 | ISO/TC 138/SC 1 |
| ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints | 60.60 | ISO/TC 138/SC 6 |
| ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system | 90.93 | ISO/TC 138/SC 1 |
| ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A | 90.93 | ISO/TC 138/SC 1 |
| ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B | 90.93 | ISO/TC 138/SC 1 |
| ISO 24511:2007 Activities relating to drinking water and wastewater services -- Guidelines for the management of wastewater utilities and for the assessment of wastewater services | 90.60 | ISO/TC 224 |
| ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques | 60.60 | ISO/TC 138/SC 6 |
