Hoses for general use, see 23.040.70
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 1401:1999 Rubber hoses for agricultural spraying | 90.93 | ISO/TC 45/SC 1 |
| ISO 1436:2009 Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 1436:2009/Cor 1:2010 | 60.60 | ISO/TC 45/SC 1 |
| ISO/DIS 1823 Rubber hose assemblies for oil suction and discharge service -- Specification | 40.20 | ISO/TC 45/SC 1 |
| ISO 1823-1:1997 Rubber hoses and hose assemblies -- Part 1: On-shore oil suction and discharge -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO 1823-2:1997 Rubber hoses and hose assemblies -- Part 2: Ship/dockside discharge -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification | 90.60 | ISO/TC 45/SC 1 |
| ISO 2929:2002 Rubber hoses and hose assemblies for bulk fuel delivery by truck -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO/DIS 2929 Rubber hoses and hose assemblies for bulk fuel delivery by truck -- Specification | 40.99 | ISO/TC 45/SC 1 |
| ISO 3821:2008 Gas welding equipment -- Rubber hoses for welding, cutting and allied processes | 60.60 | ISO/TC 44/SC 8 |
| ISO 3861:2005 Rubber hoses for sand and grit blasting -- Specification | 90.60 | ISO/TC 45/SC 1 |
| ISO 3862:2009 Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 3949:2009 Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 3996:1995 Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid | 90.92 | ISO/TC 22/SC 2 |
| ISO 4038:1996 Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings | 90.60 | ISO/TC 22/SC 2 |
| ISO 4079:2009 Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 4081:2010 Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 4642-1:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 1: Semi-rigid hoses for fixed systems | 60.60 | ISO/TC 45/SC 1 |
| ISO 4642-2:2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service -- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles | 60.60 | ISO/TC 45/SC 1 |
| ISO 4671:2007 Rubber and plastics hoses and hose assemblies -- Methods of measurement of the dimensions of hoses and the lengths of hose assemblies | 90.93 | ISO/TC 45/SC 1 |
| ISO 4671:2007/Amd 1:2011 Clarification of position at which outside diameter is measured | 60.60 | ISO/TC 45/SC 1 |
| ISO/DIS 5359 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases | 40.60 | ISO/TC 121/SC 1 |
| ISO 5359:2008 Low-pressure hose assemblies for use with medical gases | 90.92 | ISO/TC 121/SC 1 |
| ISO 5359:2008/Amd 1:2011 | 60.60 | ISO/TC 121/SC 1 |
| ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia -- Specification | 90.93 | ISO/TC 45/SC 1 |
| ISO/CD 5772 Rubber hoses and hose assemblies for measured fuel dispensing -- Specification | 30.99 | ISO/TC 45/SC 1 |
| ISO 5772:1998 Rubber hoses and hose assemblies for measured fuel dispensing -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO 6120:1995 Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid | 90.93 | ISO/TC 22/SC 2 |
| ISO 6605:2002 Hydraulic fluid power -- Hoses and hose assemblies -- Test methods | 90.20 | ISO/TC 131/SC 4 |
| ISO 6772:2012 Aerospace -- Fluid systems -- Impulse testing of hydraulic hose, tubing and fitting assemblies | 60.60 | ISO/TC 20/SC 10 |
| ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 6805:1994 Rubber hoses and hose assemblies for underground mining -- Wire-reinforced hydraulic types for coal mining -- Specification | 90.93 | ISO/TC 45/SC 1 |
| ISO 6806:1992 Rubber hoses and hose assemblies for use in oil burners -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO/DIS 6806 Rubber hoses and hose assemblies for use in oil burners -- Specification | 40.99 | ISO/TC 45/SC 1 |
| ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications -- Specification | 90.60 | ISO/TC 45/SC 1 |
| ISO 6808:1999 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO/DIS 6808 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification | 40.60 | ISO/TC 45/SC 1 |
| ISO 7258:1984 Polytetrafluoroethylene (PTFE) tubing for aerospace applications -- Methods for the determination of the density and relative density | 90.93 | ISO/TC 20/SC 10 |
| ISO 7313:1984 Aircraft -- High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) | 90.93 | ISO/TC 20/SC 10 |
| ISO 8028:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification | 90.93 | ISO/TC 45/SC 1 |
| ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning -- Specification -- Part 2: Refrigerant 134a | 90.93 | ISO/TC 45/SC 1 |
| ISO 8153-1:2009 Aerospace fluid systems and components -- Vocabulary -- Part 1: Hose assemblies | 60.60 | ISO/TC 20/SC 10 |
| ISO 8207:1996 Gas welding equipment -- Specification for hose assemblies for equipment for welding, cutting and allied processes | 90.93 | ISO/TC 44/SC 8 |
| ISO/TR 8354:1987 Rubber hoses and hose assemblies for underground mining -- Textile-reinforced air and water type | 90.93 | ISO/TC 45/SC 1 |
| ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO 8829-1:2009 Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 1: Metallic (stainless steel) braid | 60.60 | ISO/TC 20/SC 10 |
| ISO 8829-2:2006 Aerospace -- Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies -- Part 2: Non-metallic braid | 90.93 | ISO/TC 20/SC 10 |
| ISO 8913:2006 Aerospace -- Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) -- Procurement specification | 90.93 | ISO/TC 20/SC 10 |
| ISO 9528:1994 Aerospace -- Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa -- Procurement specification | 90.93 | ISO/TC 20/SC 10 |
| ISO 9938:1994 Aerospace -- Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa -- Procurement specification | 90.93 | ISO/TC 20/SC 10 |
| ISO 10502:2012 Aerospace -- Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa -- Technical specifications and requirements | 60.60 | ISO/TC 20/SC 10 |
| ISO 11237:2010 Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification | 60.60 | ISO/TC 45/SC 1 |
| ISO/TR 11340:1994 Rubber and rubber products -- Hydraulic hose assemblies -- External leakage classification for hydraulic systems | 90.93 | ISO/TC 45/SC 1 |
| ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification | 90.93 | ISO/TC 45/SC 1 |
| ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification | 90.60 | ISO/TC 45/SC 1 |
| ISO 12170:1996 Gas welding equipment -- Thermoplastic hoses for welding and allied processes | 90.93 | ISO/TC 44/SC 8 |
| ISO/NP 13363 Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification | 10.99 | ISO/TC 45/SC 1 |
| ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification | 90.92 | ISO/TC 45/SC 1 |
| ISO 13363:2004/Cor 1:2008 | 60.60 | ISO/TC 45/SC 1 |
| ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability | 90.60 | ISO/TC 45/SC 1 |
| ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications | 90.60 | ISO/TC 45/SC 1 |
| ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications | 90.92 | ISO/TC 45/SC 1 |
| ISO/FDIS 14113 Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | 50.20 | ISO/TC 44/SC 8 |
| ISO 14113:2007 Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | 90.92 | ISO/TC 44/SC 8 |
| ISO 14557:2002 Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies | 90.92 | ISO/TC 45/SC 1 |
| ISO 14557:2002/Amd 1:2007 | 60.60 | ISO/TC 45/SC 1 |
| ISO 15540:1999 Ships and marine technology -- Fire resistance of hose assemblies -- Test methods | 90.93 | ISO/TC 8/SC 3 |
| ISO 15540:1999/Cor 1:1999 | 60.60 | ISO/TC 8/SC 3 |
| ISO 15541:1999 Ships and marine technology -- Fire resistance of hose assemblies -- Requirements for the test bench | 90.93 | ISO/TC 8/SC 3 |
| ISO/DIS 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools -- Specification | 40.60 | ISO/TC 45/SC 1 |
| ISO/CD 16964 Gas cylinders - Flexible hoses for use with industrial and medical gases | 30.99 | ISO/TC 58/SC 2 |
| ISO/CD 17324 Rubber hoses for automotive turbochargers -- Specification | 30.60 | ISO/TC 45/SC 1 |
| ISO 19013-1:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 1: Diesel fuels | 90.60 | ISO/TC 45/SC 1 |
| ISO 19013-2:2005 Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 2: Gasoline fuels | 90.60 | ISO/TC 45/SC 1 |
| ISO 21012:2006 Cryogenic vessels -- Hoses | 90.93 | ISO/TC 220 |
| ISO 23297:2008 Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications -- Specification | 90.93 | ISO/TC 45/SC 1 |
| ISO/DIS 27126 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals -- Specification | 40.60 | ISO/TC 45/SC 1 |
| ISO/DIS 27127 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas -- Specification | 40.60 | ISO/TC 45/SC 1 |
| ISO 28017:2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications -- Specification | 60.60 | ISO/TC 45/SC 1 |
