Plastics pipes, fittings and valves for general use, see 23.040.20 23.040.45 23.060
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 4437:2007 Buried polyethylene (PE) pipes for the supply of gaseous fuels -- Metric series -- Specifications | 90.92 | ISO/TC 138/SC 4 |
| ISO 6993-1:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) | 90.93 | ISO/TC 138/SC 4 |
| ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) | 90.93 | ISO/TC 138/SC 4 |
| ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) | 90.93 | ISO/TC 138/SC 4 |
| ISO 6993-4:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels -- Part 4: Code of practice for design, handling and installation | 90.93 | ISO/TC 138/SC 4 |
| ISO 7628:2010 Road vehicles -- Thermoplastics tubing for air braking systems | 60.60 | ISO/TC 22/SC 2 |
| ISO 8085-1:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 1: Fittings for socket fusion using heated tools | 90.92 | ISO/TC 138/SC 4 |
| ISO 8085-1:2001/Cor 1:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 8085-2:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings | 90.92 | ISO/TC 138/SC 4 |
| ISO 8085-2:2001/Cor 1:2001 | 60.60 | ISO/TC 138/SC 4 |
| ISO 8085-2:2001/Cor 2:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 8085-3:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels -- Metric series -- Specifications -- Part 3: Electrofusion fittings | 90.92 | ISO/TC 138/SC 4 |
| ISO 8085-3:2001/Cor 1:2007 | 60.60 | ISO/TC 138/SC 4 |
| ISO 8085-3:2001/Cor 2:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 8233:1988 Thermoplastics valves -- Torque -- Test method | 90.60 | ISO/TC 138/SC 7 |
| ISO 8659:1989 Thermoplastics valves -- Fatigue strength -- Test method | 90.93 | ISO/TC 138/SC 7 |
| ISO 9393-1:2004 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General | 90.60 | ISO/TC 138/SC 7 |
| ISO 9393-2:2005 Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 2: Test conditions and basic requirements | 90.93 | ISO/TC 138/SC 7 |
| ISO 9808:1990 Solar water heaters -- Elastomeric materials for absorbers, connecting pipes and fittings -- Method of assessment | 90.60 | ISO/TC 180 |
| ISO 10838-1:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm | 90.93 | ISO/TC 138/SC 4 |
| ISO 10838-3:2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels -- Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm | 90.93 | ISO/TC 138/SC 4 |
| ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems | 90.92 | ISO/TC 138/SC 7 |
| ISO 11424:1996 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines -- Specification | 90.93 | ISO/TC 45/SC 1 |
| ISO 13775-1:2000 Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications | 90.60 | ISO/TC 45/SC 1 |
| ISO 13775-2:2000 Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications | 90.92 | ISO/TC 45/SC 1 |
| ISO 14692-1:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials | 90.92 | ISO/TC 67/SC 6 |
| ISO 14692-2:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture | 90.92 | ISO/TC 67/SC 6 |
| ISO 14692-2:2002/Cor 1:2005 | 60.60 | ISO/TC 67/SC 6 |
| ISO 14692-3:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design | 90.92 | ISO/TC 67/SC 6 |
| ISO 14692-3:2002/Cor 1:2005 | 60.60 | ISO/TC 67/SC 6 |
| ISO 14692-4:2002 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation | 90.92 | ISO/TC 67/SC 6 |
| ISO 14692-4:2002/Cor 1:2006 | 60.60 | ISO/TC 67/SC 6 |
| ISO 15840:2004 Ships and marine technology -- Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications | 90.60 | ISO/TC 8/SC 3 |
| ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 1: General | 60.60 | ISO/TC 138/SC 4 |
| ISO 16486-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 4 |
| ISO 16486-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 4 |
| ISO 16486-5:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 4 |
| ISO 16486-6:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 6: Code of practice for design, handling and installation | 60.60 | ISO/TC 138/SC 4 |
