Including mineral oils, fluids for metal working and for temporary protection against corrosion
Insulating oils, see 29.040.10
Lubrication systems, see 21.260
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 2137:2007 Petroleum products and lubricants -- Determination of cone penetration of lubricating greases and petrolatum | 90.93 | ISO/TC 28 |
| ISO 2176:1995 Petroleum products -- Lubricating grease -- Determination of dropping point | 90.93 | ISO/TC 28 |
| ISO 2176:1995/Cor 1:2001 | 60.60 | ISO/TC 28 |
| ISO 3448:1992 Industrial liquid lubricants -- ISO viscosity classification | 90.60 | ISO/TC 28 |
| ISO 3448:1992/Cor 1:1993 | 60.60 | ISO/TC 28 |
| ISO 3987:2010 Petroleum products -- Determination of sulfated ash in lubricating oils and additives | 60.60 | ISO/TC 28 |
| ISO 3987:2010/Cor 1:2011 | 60.60 | ISO/TC 28 |
| ISO 4263-1:2003 Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 1: Procedure for mineral oils | 90.60 | ISO/TC 28 |
| ISO 4263-4:2006 Petroleum and related products -- Determination of the ageing behaviour of inhibited oils and fluids -- TOST test -- Part 4: Procedure for industrial gear oils | 90.60 | ISO/TC 28 |
| ISO 6247:1998 Petroleum products -- Determination of foaming characteristics of lubricating oils | 90.60 | ISO/TC 28 |
| ISO 6247:1998/Cor 1:1999 | 60.60 | ISO/TC 28 |
| ISO 6299:1998 Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range) | 90.60 | ISO/TC 28 |
| ISO 6617:1994 Petroleum-based lubricating oils -- Aging characteristics -- Determination of change in Conradson carbon residue after oxidation | 90.93 | ISO/TC 28 |
| ISO 6743-1:2002 Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems) | 90.20 | ISO/TC 28/SC 4 |
| ISO 6743-2:1981 Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family F (Spindle bearings, bearings and associated clutches) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-3:2003 Lubricants, industrial oils and related products (class L) -- Classification -- Part 3: Family D (Compressors) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-5:2006 Lubricants, industrial oils and related products (class L) -- Classification -- Part 5: Family T (Turbines) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-6:1990 Lubricants, industrial oils and related products (class L) -- Classification -- Part 6: Family C (Gears) | 90.93 | ISO/TC 28/SC 4 |
| ISO 6743-7:1986 Lubricants, industrial oils and related products (class L) -- Classification -- Part 7: Family M (Metalworking) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-8:1987 Lubricants, industrial oils and related products (class L) -- Classification -- Part 8: Family R (Temporary protection against corrosion) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-9:2003 Lubricants, industrial oils and related products (class L) -- Classification -- Part 9: Family X (Greases) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-10:1989 Lubricants, industrial oils and related products (class L) -- Classification -- Part 10: Family Y (Miscellaneous) | 90.93 | ISO/TC 28/SC 4 |
| ISO 6743-11:1990 Lubricants, industrial oils and related products (class L) -- Classification -- Part 11: Family P (Pneumatic tools) | 90.93 | ISO/TC 28/SC 4 |
| ISO 6743-12:1989 Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids) | 90.93 | ISO/TC 28/SC 4 |
| ISO 6743-13:2002 Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways) | 90.60 | ISO/TC 28/SC 4 |
| ISO 6743-14:1994 Lubricants, industrial oils and related products (class L) -- Classification -- Part 14: Family U (Heat treatment) | 90.93 | ISO/TC 28/SC 4 |
| ISO 6743-15:2007 Lubricants, industrial oils and related products (class L) -- Classification -- Part 15: Family E (Internal combustion engine oils) | 90.93 | ISO/TC 28/SC 4 |
| ISO 6743-99:2002 Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General | 90.60 | ISO/TC 28/SC 4 |
| ISO 8068:2006 Lubricants, industrial oils and related products (class L) -- Family T (Turbines) -- Specification for lubricating oils for turbines | 90.60 | ISO/TC 28/SC 4 |
| ISO 9120:1997 Petroleum and related products -- Determination of air-release properties of steam turbine and other oils -- Impinger method | 90.60 | ISO/TC 28 |
| ISO 9950:1995 Industrial quenching oils -- Determination of cooling characteristics -- Nickel-alloy probe test method | 90.93 | ISO/TC 28 |
| ISO 10416:2008 Petroleum and natural gas industries -- Drilling fluids -- Laboratory testing | 90.60 | ISO/TC 67/SC 3 |
| ISO 11007:1997 Petroleum products and lubricants -- Determination of rust-prevention characteristics of lubricating greases | 90.60 | ISO/TC 28 |
| ISO 11009:2000 Petroleum products and lubricants -- Determination of water washout characteristics of lubricating greases | 90.93 | ISO/TC 28 |
| ISO/TS 11366:2011 Petroleum and related products -- Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines | 60.60 | ISO/TC 28/SC 4 |
| ISO 12152:2012 Lubricants, industrial oils and related products -- Determination of the foaming and air release properties of industrial gear oils using a spur gear test rig -- Flender foam test procedure | 60.60 | ISO/TC 28 |
| ISO 12924:2010 Lubricants, industrial oils and related products (Class L) -- Family X (Greases) -- Specification | 60.60 | ISO/TC 28/SC 4 |
| ISO 12924:2010/Cor 1:2012 | 60.60 | ISO/TC 28/SC 4 |
| ISO 12925-1:1996 Lubricants, industrial oils and related products (class L) -- Family C (Gears) -- Part 1: Specifications for lubricants for enclosed gear systems | 90.93 | ISO/TC 28/SC 4 |
| ISO 12925-1:1996/Cor 1:2002 | 60.60 | ISO/TC 28/SC 4 |
| ISO/TS 12927:1999 Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications | 90.60 | ISO/TC 28/SC 4 |
| ISO/TS 12928:1999 Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications | 90.60 | ISO/TC 28/SC 4 |
| ISO 13357-1:2002 Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water | 90.60 | ISO/TC 28 |
| ISO 13357-2:2005 Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils | 90.93 | ISO/TC 28 |
| ISO 13503-1:2011 Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids | 60.60 | ISO/TC 67/SC 3 |
| ISO 13503-2:2006 Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | 90.60 | ISO/TC 67/SC 3 |
| ISO 13503-2:2006/Amd 1:2009 Addition of Annex B: Proppand specification | 60.60 | ISO/TC 67/SC 3 |
| ISO 13503-3:2005 Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines | 90.92 | ISO/TC 67/SC 3 |
| ISO/CD 13503-3 Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines | 30.60 | ISO/TC 67/SC 3 |
| ISO 13503-3:2005/Cor 1:2006 | 60.60 | ISO/TC 67/SC 3 |
| ISO 13503-4:2006 Petroleum and natural gas industries -- Completion fluids and materials -- Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions | 90.60 | ISO/TC 67/SC 3 |
| ISO 13503-5:2006 Petroleum and natural gas industries -- Completion fluids and materials -- Part 5: Procedures for measuring the long-term conductivity of proppants | 90.60 | ISO/TC 67/SC 3 |
| ISO 13503-6 Petroleum and natural gas industries -- Completion fluids and materials -- Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions | 60.00 | ISO/TC 67/SC 3 |
| ISO 13737:2004 Petroleum products and lubricants -- Determination of low-temperature cone penetration of lubricating greases | 90.60 | ISO/TC 28 |
| ISO 13738:2011 Lubricants, industrial oils and related products (class L) -- Family E (Internal combustion engine oils) -- Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) | 60.60 | ISO/TC 28/SC 4 |
| ISO 15380:2011 Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for categories HETG, HEPG, HEES and HEPR | 60.60 | ISO/TC 28/SC 4 |
| ISO 19378:2003 Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications | 90.20 | ISO/TC 28/SC 4 |
| ISO 20623:2003 Petroleum and related products -- Determination of the extreme-pressure and anti-wear properties of fluids -- Four ball method (European conditions) | 90.60 | ISO/TC 28 |
| ISO 24254:2007 Lubricants, industrial oils and related products (class L) -- Family E (internal combustion engine oils) -- Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) | 90.93 | ISO/TC 28/SC 4 |
| ISO 26422:2011 Petroleum and related products -- Determination of shear stability of lubricating oils containing polymers -- Method using a tapered roller bearing | 90.92 | ISO/TC 28 |
