Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 237:1975 Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares | 90.93 | ISO/TC 29 |
| ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application | 60.60 | ISO/TC 29/SC 9 |
| ISO 883:1985 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions | 90.92 | ISO/TC 29/SC 9 |
| ISO 883 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions | 60.00 | ISO/TC 29/SC 9 |
| ISO 1832:2012 Indexable inserts for cutting tools -- Designation | 60.60 | ISO/TC 29/SC 9 |
| ISO 3002-1:1982 Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms, reference systems, tool and working angles, chip breakers | 90.93 | ISO/TC 29 |
| ISO 3002-1:1982/Amd 1:1992 | 60.60 | ISO/TC 29 |
| ISO 3002-2:1982 Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles | 90.93 | ISO/TC 29 |
| ISO 3002-3:1984 Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in cutting | 90.93 | ISO/TC 29 |
| ISO 3002-4:1984 Basic quantities in cutting and grinding -- Part 4: Forces, energy, power | 90.93 | ISO/TC 29 |
| ISO 3002-5:1989 Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes using grinding wheels | 90.93 | ISO/TC 29 |
| ISO 3286:1976 Single point cutting tools -- Corner radii | 90.93 | ISO/TC 29/SC 9 |
| ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions | 60.60 | ISO/TC 29/SC 9 |
| ISO 3365:1985 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions | 90.93 | ISO/TC 29/SC 9 |
| ISO 4203:1978 Parallel shank tools -- Driving tenons and sockets -- Dimensions | 90.93 | ISO/TC 29/SC 2 |
| ISO/DIS 5610-1 Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-1:2010 Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions | 90.92 | ISO/TC 29/SC 9 |
| ISO 5610-2:2010 Tool holders with rectangular shank for indexable inserts -- Part 2: Style A | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-2 Tool holders with rectangular shank for indexable inserts -- Part 2: Style A | 40.99 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-3 Tool holders with rectangular shank for indexable inserts -- Part 3: Style B | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-3:2010 Tool holders with rectangular shank for indexable inserts -- Part 3: Style B | 90.92 | ISO/TC 29/SC 9 |
| ISO 5610-4:2010 Tool holders with rectangular shank for indexable inserts -- Part 4: Style D | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-4 Tool holders with rectangular shank for indexable inserts -- Part 4: Style D | 40.99 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-5 Tool holders with rectangular shank for indexable inserts -- Part 5: Style F | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-5:2010 Tool holders with rectangular shank for indexable inserts -- Part 5: Style F | 90.92 | ISO/TC 29/SC 9 |
| ISO 5610-6:2010 Tool holders with rectangular shank for indexable inserts -- Part 6: Style G | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-6 Tool holders with rectangular shank for indexable inserts -- Part 6: Style G | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-7:2010 Tool holders with rectangular shank for indexable inserts -- Part 7: Style J | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-7 Tool holders with rectangular shank for indexable inserts -- Part 7: Style J | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-8:2010 Tool holders with rectangular shank for indexable inserts -- Part 8: Style K | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-8 Tool holders with rectangular shank for indexable inserts -- Part 8: Style K | 40.99 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-9 Tool holders with rectangular shank for indexable inserts -- Part 9: Style L | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-9:2010 Tool holders with rectangular shank for indexable inserts -- Part 9: Style L | 90.92 | ISO/TC 29/SC 9 |
| ISO 5610-10:2010 Tool holders with rectangular shank for indexable inserts -- Part 10: Style N | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-10 Tool holders with rectangular shank for indexable inserts -- Part 10: Style N | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-11:2010 Tool holders with rectangular shank for indexable inserts -- Part 11: Style R | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-11 Tool holders with rectangular shank for indexable inserts -- Part 11: Style R | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-12:2010 Tool holders with rectangular shank for indexable inserts -- Part 12: Style S | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-12 Tool holders with rectangular shank for indexable inserts -- Part 12: Style S | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-13:2010 Tool holders with rectangular shank for indexable inserts -- Part 13: Style T | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-13 Tool holders with rectangular shank for indexable inserts -- Part 13: Style T | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-14:2010 Tool holders with rectangular shank for indexable inserts -- Part 14: Style H | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-14 Tool holders with rectangular shank for indexable inserts -- Part 14: Style H | 40.99 | ISO/TC 29/SC 9 |
| ISO 5610-15:2010 Tool holders with rectangular shank for indexable inserts -- Part 15: Style V | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 5610-15 Tool holders with rectangular shank for indexable inserts -- Part 15: Style V | 40.99 | ISO/TC 29/SC 9 |
| ISO/WD 5611 Cartridges, type A, for indexable inserts -- Dimensions | 20.20 | ISO/TC 29/SC 9 |
| ISO 5611:1995 Cartridges, type A, for indexable inserts -- Dimensions | 90.92 | ISO/TC 29/SC 9 |
| ISO 6987:2012 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions | 60.60 | ISO/TC 29/SC 9 |
| ISO 9361-1:1991 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole | 90.60 | ISO/TC 29/SC 9 |
| ISO 9361-2:2011 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole | 60.60 | ISO/TC 29/SC 9 |
| ISO 10643:2009 Dimensions of accessories for cutter arbors with parallel key and tenon drive | 60.60 | ISO/TC 29/SC 2 |
| ISO 10910:1995 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers | 90.93 | ISO/TC 29/SC 9 |
| ISO 11054:2006 Cutting tools -- Designation of high-speed steel groups | 90.93 | ISO/TC 29 |
| ISO 13399-1:2006 Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and general information model | 90.93 | ISO/TC 29 |
| ISO 13399-1:2006/Cor 1:2008 | 60.60 | ISO/TC 29 |
| ISO 13399-1:2006/Amd 1:2010 | 60.60 | ISO/TC 29 |
| ISO 13399-1:2006/Cor 2:2011 | 60.60 | ISO/TC 29 |
| ISO/DTS 13399-2 Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items | 30.99 | ISO/TC 29 |
| ISO/TS 13399-2:2005 Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items | 90.92 | ISO/TC 29 |
| ISO/TS 13399-2:2005/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/TS 13399-3:2007 Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items | 90.92 | ISO/TC 29 |
| ISO/DTS 13399-3 Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items | 30.99 | ISO/TC 29 |
| ISO/TS 13399-3:2007/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/TS 13399-4:2007 Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items | 90.92 | ISO/TC 29 |
| ISO/DTS 13399-4 Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items | 30.99 | ISO/TC 29 |
| ISO/TS 13399-4:2007/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/TS 13399-5:2007 Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items | 90.92 | ISO/TC 29 |
| ISO/DTS 13399-5 Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items | 30.99 | ISO/TC 29 |
| ISO/TS 13399-5:2007/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/DTS 13399-50 Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts | 30.99 | ISO/TC 29 |
| ISO/TS 13399-50:2007 Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts | 90.92 | ISO/TC 29 |
| ISO/TS 13399-50:2007/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/DTS 13399-60 Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems | 30.99 | ISO/TC 29 |
| ISO/TS 13399-60:2007 Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems | 90.92 | ISO/TC 29 |
| ISO/TS 13399-60:2007/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/CD TS 13399-80 Cutting tool data representation and exchange -- Part 80: Concept for the design of 3D models based on properties according to ISO 13399 -- Overview and principles | 30.00 | ISO/TC 29 |
| ISO/NP TS 13399-100 Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries | 10.99 | ISO/TC 29 |
| ISO/TS 13399-100:2008 Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries | 90.92 | ISO/TC 29 |
| ISO/TS 13399-100:2008/Cor 1:2011 | 60.60 | ISO/TC 29 |
| ISO/TS 13399-150:2008 Cutting tool data representation and exchange -- Part 150: Usage guidelines | 90.93 | ISO/TC 29 |
| ISO/NP TS 13399-201 Cutting tool data representation and exchange -- Part 201: Concept for the design of 3D models based on properties according to ISO/TS 13399-2: Modelling of regular inserts | 10.99 | ISO/TC 29 |
| ISO/CD TS 13399-202 Cutting tool data representation and exchange -- Part 202: Concept for the design of 3D models based on properties according to ISO/TS 13399-2: Modelling of irregular inserts | 30.00 | ISO/TC 29 |
| ISO/CD TS 13399-203 Cutting tool data representation and exchange -- Part 203: Concept for the design of 3D models based on properties according to ISO/TS 13399-2: Modelling of exchangeable inserts for drilling | 30.00 | ISO/TC 29 |
| ISO/PRF TS 13399-301 Cutting tool data representation and exchange -- Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread cutting taps, thread forming taps and thread cutting dies | 50.20 | ISO/TC 29 |
| ISO/PRF TS 13399-302 Cutting tool data representation and exchange -- Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools | 50.20 | ISO/TC 29 |
| ISO/NP TS 13399-303 Cutting tool data representation and exchange -- Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399-3:- Modelling of end mills with non-indexable cutting edges | 10.99 | ISO/TC 29 |
| ISO/NP TS 13399-304 Cutting tool data representation and exchange -- Part 304: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of milling cutters with arbor hole and non-indexable cutting edges | 10.99 | ISO/TC 29 |
| ISO/NP TS 13399-307 Cutting tool data representation and exchange -- Part 307: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 -- Modeling of end mills with indexable inserts | 10.99 | ISO/TC 29 |
| ISO/NP TS 13399-308 Cutting tool data representation and exchange -- Part 308: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of milling cutters with arbor hole for indexable inserts | 10.99 | ISO/TC 29 |
| ISO/NP TS 13399-311 Cutting tool data representation and exchange -- Part 311: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid reamers | 10.99 | ISO/TC 29 |
| ISO/NP TS 13399-312 Cutting tool data representation and exchange -- Part 312: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of reamers for indexable inserts | 10.99 | ISO/TC 29 |
| ISO/DIS 16462 Cubic boron nitride inserts, tipped or solid -- Dimensions, types | 40.99 | ISO/TC 29/SC 9 |
| ISO 16462:2004 Cubic boron nitride inserts, tipped or solid -- Dimensions, types | 90.92 | ISO/TC 29/SC 9 |
| ISO 16463:2004 Polycristalline diamond inserts, tipped -- Dimensions, types | 90.92 | ISO/TC 29/SC 9 |
| ISO/DIS 16463 Polycristalline diamond inserts, tipped -- Dimensions, types | 40.99 | ISO/TC 29/SC 9 |
