Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 3019-1:2001 Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units | 90.60 | ISO/TC 131/SC 2 |
| ISO 3019-1:1975 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 1: Inch series shown in metric units | 95.99 | ISO/TC 131/SC 2 |
| ISO 3019-2:1986 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 2: Two- and four-hole flanges and shaft ends -- Metric series | 95.99 | ISO/TC 131/SC 2 |
| ISO 3019-2:2001 Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series | 90.60 | ISO/TC 131/SC 2 |
| ISO 3019-2:1980 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 2: 2 and 4-hole flanges and shaft ends -- Metric series | 95.99 | ISO/TC 131 |
| ISO 3019-2:2001/Cor 1:2006 | 60.60 | ISO/TC 131/SC 2 |
| ISO 3019-3:1981 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 3: Polygonal flanges (including circular flanges) | 95.99 | ISO/TC 131/SC 2 |
| ISO 3019-3:1988 Hydraulic fluid power -- Positive displacement pumps and motors -- Dimensions and identification code for mounting flanges and shaft ends -- Part 3: Polygonal flanges (including circular flanges) | 95.99 | ISO/TC 131/SC 2 |
| ISO 3662:1976 Hydraulic fluid power -- Pumps and motors -- Geometric displacements | 90.93 | ISO/TC 131/SC 2 |
| ISO 4391:1983 Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols | 90.93 | ISO/TC 131/SC 2 |
| ISO 4392-1:1989 Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure | 95.99 | ISO/TC 131/SC 8 |
| ISO 4392-1:1988 Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure | 95.99 | ISO/TC 131/SC 8 |
| ISO 4392-1:2002 Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and constant pressure | 90.93 | ISO/TC 131/SC 8 |
| ISO 4392-2:2002 Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability | 90.60 | ISO/TC 131/SC 8 |
| ISO 4392-2:1989 Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability | 95.99 | ISO/TC 131/SC 8 |
| ISO 4392-2:1988 Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability | 95.99 | ISO/TC 131/SC 8 |
| ISO 4392-3:1993 Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque | 90.93 | ISO/TC 131/SC 8 |
| ISO 4409:1986 Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance | 95.99 | ISO/TC 131/SC 8 |
| ISO 4409:2007 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance | 90.92 | ISO/TC 131/SC 8 |
| ISO 4412-1:1979 Hydraulic fluid power -- Test code for the determination of airborne noise levels -- Part 1: Pumps | 95.99 | ISO/TC 131/SC 8 |
| ISO 4412-1:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps | 90.93 | ISO/TC 131/SC 8 |
| ISO 4412-2:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors | 90.93 | ISO/TC 131/SC 8 |
| ISO 4412-2:1984 Hydraulic fluid power -- Test code for the determination of airborne noise levels -- Part 2: Motors | 95.99 | ISO/TC 131/SC 8 |
| ISO 4412-3:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array | 90.93 | ISO/TC 131/SC 8 |
| ISO 8426:1988 Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity | 95.99 | ISO/TC 131/SC 8 |
| ISO 8426:2008 Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity | 90.60 | ISO/TC 131/SC 8 |
| ISO 9632:1992 Hydraulic fluid power -- Fixed displacement pumps -- Flow degradation due to classified AC Fine Test Dust contaminant -- Test method | 95.99 | ISO/TC 131/SC 8 |
| ISO 10767-1:1996 Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 1: Precision method for pumps | 90.92 | ISO/TC 131/SC 8 |
| ISO/DIS 10767-1 Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 1: Method for determining source flow ripple and source impedance of pumps | 40.20 | ISO/TC 131/SC 8 |
| ISO 10767-2:1999 Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps | 90.60 | ISO/TC 131/SC 8 |
| ISO 10767-3:1999 Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 3: Method for motors | 90.60 | ISO/TC 131/SC 8 |
| ISO 16902-1:2003 Hydraulic fluid power -- Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method -- Part 1: Pumps | 90.93 | ISO/TC 131/SC 8 |
| ISO 17559:2003 Hydraulic fluid power -- Electrically controlled hydraulic pumps -- Test methods to determine performance characteristics | 90.93 | ISO/TC 131/SC 8 |
