Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 161-1:1996 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 1: Metric series | 90.60 | ISO/TC 138 |
| ISO 161-2:1996 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series | 90.60 | ISO/TC 138 |
| ISO 265-1:1988 Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) | 90.93 | ISO/TC 138/SC 1 |
| ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method | 90.93 | ISO/TC 138/SC 5 |
| ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces | 90.93 | ISO/TC 138/SC 5 |
| ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components | 90.93 | ISO/TC 138/SC 5 |
| ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies | 90.93 | ISO/TC 138/SC 5 |
| ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves | 60.60 | ISO/TC 138/SC 2 |
| ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO 2505:2005 Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters | 90.93 | ISO/TC 138/SC 5 |
| ISO 2507-1:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 2507-2:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes | 90.93 | ISO/TC 138/SC 5 |
| ISO 2507-3:1995 Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings | 90.93 | ISO/TC 138/SC 5 |
| ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 3126:2005 Plastics piping systems -- Plastics components -- Determination of dimensions | 90.93 | ISO/TC 138/SC 5 |
| ISO 3127:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method | 90.93 | ISO/TC 138/SC 5 |
| ISO 3213:2009 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength | 60.60 | ISO/TC 138/SC 5 |
| ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density | 90.93 | ISO/TC 138/SC 5 |
| ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Unplasticized poly(vinyl chloride) (PVC-U) | 90.60 | ISO/TC 138/SC 1 |
| ISO 4059:1978 Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements | 90.93 | ISO/TC 138/SC 5 |
| ISO 4065:1996 Thermoplastics pipes -- Universal wall thickness table | 90.60 | ISO/TC 138 |
| ISO/TR 4191:1989 Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying | 90.93 | ISO/TC 138/SC 2 |
| ISO/DTR 4191 Plastics piping systems for water supply -- Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) -- Guidance for installation | 30.20 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 1: General | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/Cor 1:2008 | 60.60 | ISO/TC 138/SC 2 |
| ISO 4427-1:2007/CD Amd 1 | 30.60 | ISO/TC 138/SC 2 |
| ISO 4427-2:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 2: Pipes | 90.93 | ISO/TC 138/SC 2 |
| ISO 4427-5:2007 Plastics piping systems -- Polyethylene (PE) pipes and fittings for water supply -- Part 5: Fitness for purpose of the system | 90.93 | ISO/TC 138/SC 2 |
| ISO 4433-1:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method | 90.20 | ISO/TC 138/SC 3 |
| ISO 4433-2:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes | 90.20 | ISO/TC 138/SC 3 |
| ISO 4433-3:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes | 90.20 | ISO/TC 138/SC 3 |
| ISO 4433-4:1997 Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes | 90.20 | ISO/TC 138/SC 3 |
| ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U) | 90.93 | ISO/TC 138/SC 1 |
| ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density | 90.93 | ISO/TC 138/SC 5 |
| ISO 6259-1:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method | 90.92 | ISO/TC 138/SC 5 |
| ISO/CD 6259-1 Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method | 30.60 | ISO/TC 138/SC 5 |
| ISO 6259-2:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) | 90.93 | ISO/TC 138/SC 5 |
| ISO 6259-3:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes | 90.92 | ISO/TC 138/SC 5 |
| ISO/CD 6259-3 Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes | 30.60 | ISO/TC 138/SC 5 |
| ISO 6964:1986 Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification | 90.92 | ISO/TC 138/SC 5 |
| ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Thermoplastics -- Recommended practice for installation | 90.92 | ISO/TC 138/SC 1 |
| ISO/TR 7073:1988 Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers | 90.93 | ISO/TC 138/SC 1 |
| ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage | 90.93 | ISO/TC 138/SC 1 |
| ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials | 90.93 | ISO/TC 138/SC 5 |
| ISO 7246:1984 Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials | 90.93 | ISO/TC 138/SC 5 |
| ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals | 90.60 | ISO/TC 138/SC 6 |
| ISO/DIS 7509 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | 40.20 | ISO/TC 138/SC 6 |
| ISO 7509:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | 90.92 | ISO/TC 138/SC 6 |
| ISO 7510:1997 Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method | 90.20 | ISO/TC 138/SC 6 |
| ISO 7511:1999 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure | 90.93 | ISO/TC 138/SC 6 |
| ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP) | 90.93 | ISO/TC 138/SC 1 |
| ISO 7675:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Chlorinated poly(vinyl chloride) (PVC-C) | 90.93 | ISO/TC 138/SC 1 |
| ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS) | 90.93 | ISO/TC 138/SC 1 |
| ISO 7684:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under dry conditions | 90.20 | ISO/TC 138/SC 6 |
| ISO 7685:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness | 90.93 | ISO/TC 138/SC 6 |
| ISO 7686:2005 Plastics pipes and fittings -- Determination of opacity | 90.93 | ISO/TC 138/SC 5 |
| ISO 8283-1:1991 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8283-2:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 2: Polyethylene (PE) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8283-3:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 3: Polypropylene (PP) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8283-4:1992 Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS) | 90.20 | ISO/TC 138/SC 1 |
| ISO 8361-1:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 8361-2:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings | 90.93 | ISO/TC 138/SC 5 |
| ISO 8361-3:1991 Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings | 90.93 | ISO/TC 138/SC 5 |
| ISO 8483:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of bolted flange joints | 90.93 | ISO/TC 138/SC 6 |
| ISO 8483:2003/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 8513:2000 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of longitudinal tensile properties | 90.92 | ISO/TC 138/SC 6 |
| ISO/DIS 8513 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength | 40.60 | ISO/TC 138/SC 6 |
| ISO 8521:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial circumferential tensile strength | 60.60 | ISO/TC 138/SC 6 |
| ISO 8533:2003 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Test methods to prove the design of cemented or wrapped joints | 90.93 | ISO/TC 138/SC 6 |
| ISO 8533:2003/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) | 90.93 | ISO/TC 138/SC 1 |
| ISO 8779:2010 Plastics piping systems -- Polyethylene (PE) pipes for irrigation -- Specifications | 60.60 | ISO/TC 138/SC 2 |
| ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints | 90.93 | ISO/TC 138/SC 5 |
| ISO 8796:2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals -- Susceptibility to environmental stress cracking induced by insert-type fittings -- Test method and requirements | 90.93 | ISO/TC 138/SC 2 |
| ISO 9080:2012 Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation | 60.60 | ISO/TC 138/SC 5 |
| ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 9854-2:1994 Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials | 90.60 | ISO/TC 138/SC 5 |
| ISO 9896:1996 Plastics traps for discharge pipework systems inside buildings | 90.93 | ISO/TC 138/SC 1 |
| ISO 9967:2007 Thermoplastics pipes -- Determination of creep ratio | 90.92 | ISO/TC 138/SC 5 |
| ISO/DIS 9967 Thermoplastics pipes -- Determination of creep ratio | 40.20 | ISO/TC 138/SC 5 |
| ISO/DIS 9969 Thermoplastics pipes -- Determination of ring stiffness | 40.20 | ISO/TC 138/SC 5 |
| ISO 9969:2007 Thermoplastics pipes -- Determination of ring stiffness | 90.92 | ISO/TC 138/SC 5 |
| ISO 10146:1997 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength | 90.93 | ISO/TC 138/SC 5 |
| ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content | 60.60 | ISO/TC 138/SC 5 |
| ISO/TR 10358:1993 Plastics pipes and fittings -- Combined chemical-resistance classification table | 90.93 | ISO/TC 138/SC 3 |
| ISO 10466:1997 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection | 90.93 | ISO/TC 138/SC 6 |
| ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.20 | ISO/TC 138/SC 6 |
| ISO 10467:2004/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 10468:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor | 90.93 | ISO/TC 138/SC 6 |
| ISO 10468:2003/Amd 1:2010 | 60.60 | ISO/TC 138/SC 6 |
| ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions | 90.93 | ISO/TC 138/SC 6 |
| ISO 10471:2003/Amd 1:2010 | 60.60 | ISO/TC 138/SC 6 |
| ISO/TR 10501:1993 Thermoplastics pipes for the transport of liquids under pressure -- Calculation of head losses | 90.93 | ISO/TC 138/SC 2 |
| ISO 10508:2006 Plastics piping systems for hot and cold water installations -- Guidance for classification and design | 90.93 | ISO/TC 138/SC 2 |
| ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 90.20 | ISO/TC 138/SC 6 |
| ISO 10639:2004/Amd 1:2011 | 60.60 | ISO/TC 138/SC 6 |
| ISO 10928:2009 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use | 60.60 | ISO/TC 138/SC 6 |
| ISO 10928:2009/Amd 1 | 60.00 | ISO/TC 138/SC 6 |
| ISO 10952:2008 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 90.92 | ISO/TC 138/SC 6 |
| ISO/DIS 10952 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 40.00 | ISO/TC 138/SC 6 |
| ISO/DTR 10986 Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 30.99 | ISO/TC 138/SC 6 |
| ISO 11173:1994 Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method | 90.93 | ISO/TC 138/SC 5 |
| ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO 11296-3:2009/Cor 1:2011 | 60.60 | ISO/TC 138 |
| ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 4: Lining with cured-in-place pipes | 60.60 | ISO/TC 138 |
| ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks -- Part 7: Lining with spirally-wound pipes | 60.60 | ISO/TC 138 |
| ISO 11297-1:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11297-3 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes | 60.00 | ISO/TC 138 |
| ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO 11299-1:2011 Plastics piping systems for renovation of underground gas supply networks -- Part 1: General | 60.60 | ISO/TC 138 |
| ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks -- Part 3: Lining with close-fit pipes | 60.60 | ISO/TC 138 |
| ISO/DIS 11619 Polyurethane tubing for use primarily in pneumatic installations -- Dimensions and specification | 40.60 | ISO/TC 45/SC 1 |
| ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties | 90.93 | ISO/TC 138/SC 5 |
| ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 1: Metric series | 90.60 | ISO/TC 138 |
| ISO 11922-2:1997 Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series | 90.60 | ISO/TC 138 |
| ISO 12091:1995 Structured-wall thermoplastics pipes -- Oven test | 90.93 | ISO/TC 138/SC 5 |
| ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient | 60.60 | ISO/TC 138/SC 5 |
| ISO 12176-1:2012 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 1: Butt fusion | 60.60 | ISO/TC 138/SC 4 |
| ISO 12176-2:2008 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 2: Electrofusion | 90.93 | ISO/TC 138/SC 4 |
| ISO 12176-3:2011 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 3: Operator's badge | 60.60 | ISO/TC 138/SC 4 |
| ISO 12176-4:2003 Plastics pipes and fittings -- Equipment for fusion jointing polyethylene systems -- Part 4: Traceability coding | 90.93 | ISO/TC 138/SC 4 |
| ISO 12230:2012 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength | 60.60 | ISO/TC 138/SC 5 |
| ISO/DIS 12512 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe | 40.00 | ISO/TC 138/SC 6 |
| ISO 13229:2010 Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value | 60.60 | ISO/TC 138/SC 1 |
| ISO 13254:2010 Thermoplastics piping systems for non-pressure applications -- Test method for watertightness | 60.60 | ISO/TC 138/SC 1 |
| ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings -- Test method for airtightness of joints | 60.60 | ISO/TC 138/SC 1 |
| ISO 13257:2010 Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling | 60.60 | ISO/TC 138/SC 1 |
| ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications -- Test method for leaktightness of elastomeric sealing ring type joints | 60.60 | ISO/TC 138/SC 1 |
| ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Test method for resistance to combined temperature cycling and external loading | 60.60 | ISO/TC 138/SC 1 |
| ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics spirally-formed structured-wall pipes -- Determination of the tensile strength of a seam | 60.60 | ISO/TC 138/SC 1 |
| ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for impact strength | 60.60 | ISO/TC 138/SC 1 |
| ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics fittings -- Test method for mechanical strength or flexibility of fabricated fittings | 60.60 | ISO/TC 138/SC 1 |
| ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Joints for buried non-pressure applications -- Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure | 60.60 | ISO/TC 138/SC 1 |
| ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of resistance against surface and traffic loading | 60.60 | ISO/TC 138/SC 1 |
| ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics inspection chamber and manhole bases -- Test methods for buckling resistance | 60.60 | ISO/TC 138/SC 1 |
| ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage -- Thermoplastics shafts or risers for inspection chambers and manholes -- Determination of ring stiffness | 60.60 | ISO/TC 138/SC 1 |
| ISO 13272:2011 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) -- Specifications for manholes and inspection chambers in traffic areas and underground installations | 60.60 | ISO/TC 138/SC 1 |
| ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test) | 90.93 | ISO/TC 138/SC 5 |
| ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST) | 90.93 | ISO/TC 138/SC 5 |
| ISO 13479:2009 Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes | 60.60 | ISO/TC 138/SC 5 |
| ISO 13480:1997 Polyethylene pipes -- Resistance to slow crack growth -- Cone test method | 90.93 | ISO/TC 138/SC 5 |
| ISO 13760:1998 Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage | 90.93 | ISO/TC 138/SC 5 |
| ISO 13761:1996 Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C | 90.92 | ISO/TC 138/SC 5 |
| ISO/CD 13844 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | 30.60 | ISO/TC 138/SC 5 |
| ISO 13844:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes -- Test method for leaktightness under negative pressure | 90.92 | ISO/TC 138/SC 2 |
| ISO 13845:2000 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | 90.92 | ISO/TC 138/SC 2 |
| ISO/CD 13845 Plastics piping systems -- Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes -- Test method for leaktightness under internal pressure and with angular deflection | 30.60 | ISO/TC 138/SC 5 |
| ISO 13950:2007 Plastics pipes and fittings -- Automatic recognition systems for electrofusion joints | 90.93 | ISO/TC 138/SC 4 |
| ISO 13950:2007/Cor 1:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 13966:1998 Thermoplastics pipes and fittings -- Nominal ring stiffnesses | 90.93 | ISO/TC 138 |
| ISO 13968:2008 Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility | 90.93 | ISO/TC 138/SC 5 |
| ISO 14236:2000 Plastics pipes and fittings -- Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems | 90.93 | ISO/TC 138/SC 2 |
| ISO 14531-1:2002 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes | 90.93 | ISO/TC 138/SC 4 |
| ISO 14531-2:2004 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 2: Fittings for heat-fusion jointing | 90.93 | ISO/TC 138/SC 4 |
| ISO 14531-3:2010 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) | 60.60 | ISO/TC 138/SC 4 |
| ISO 14531-4:2006 Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 4: System design and installation guidelines | 90.93 | ISO/TC 138/SC 4 |
| ISO 14828:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor | 90.93 | ISO/TC 138/SC 6 |
| ISO 14828:2003/Amd 1:2010 | 60.60 | ISO/TC 138/SC 6 |
| ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the resistance to cyclic internal pressure | 90.93 | ISO/TC 138/SC 6 |
| ISO 15306:2003/Amd 1:2012 | 60.60 | ISO/TC 138/SC 6 |
| ISO 15874-1:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 15874-2:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 15874-5:2013 Plastics piping systems for hot and cold water installations -- Polypropylene (PP) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 2: Pipes | 90.93 | ISO/TC 138/SC 2 |
| ISO 15875-2:2003/Amd 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 5: Fitness for purpose of the system | 90.93 | ISO/TC 138/SC 2 |
| ISO 15875-5:2003/Cor 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations -- Crosslinked polyethylene (PE-X) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 2: Pipes | 90.92 | ISO/TC 138/SC 2 |
| ISO 15876-2:2003/Amd 1:2007 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15876-5:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 5: Fitness for purpose of the system | 90.92 | ISO/TC 138/SC 2 |
| ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations -- Polybutylene (PB) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-1:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-2:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 5: Fitness for purpose of the system | 60.60 | ISO/TC 138/SC 2 |
| ISO 15877-5:2009/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) | 90.93 | ISO/TC 138/SC 5 |
| ISO 16422:2006 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 90.92 | ISO/TC 138/SC 2 |
| ISO/DIS 16422.2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications | 40.60 | ISO/TC 138/SC 2 |
| ISO/TS 16479:2012 Thermoplastics pipes for the conveyance of fluids -- Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT) | 60.60 | ISO/TC 138/SC 5 |
| ISO/WD 16611 Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests | 20.99 | ISO/TC 138/SC 6 |
| ISO 16871:2003 Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering | 90.93 | ISO/TC 138/SC 5 |
| ISO/TR 16913:1999 Plastics pipes and fittings -- Definitions of types of test | 90.93 | ISO/TC 138/SC 5 |
| ISO/DTR 16943 Plastics piping systems for the supply of gaseous fuels -- On site inspection of PE electrofusion joints using Non Destructive Testing (NDT) | 30.60 | ISO/TC 138/SC 5 |
| ISO 17454:2006 Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig | 90.93 | ISO/TC 138/SC 5 |
| ISO 17455:2005 Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe | 90.93 | ISO/TC 138/SC 5 |
| ISO 17455:2005/Cor 1:2007 | 60.60 | ISO/TC 138/SC 5 |
| ISO 17456:2006 Plastics piping systems -- Multilayer pipes -- Determination of long-term strength | 90.93 | ISO/TC 138/SC 5 |
| ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 1: General | 60.60 | ISO/TC 138/SC 4 |
| ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 4 |
| ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems jointed by solvent cement -- Part 3: Fittings | 60.60 | ISO/TC 138/SC 4 |
| ISO/DIS 17484-1 Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems | 40.93 | ISO/TC 138/SC 4 |
| ISO 17484-1:2006 Plastics piping systems -- Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) -- Part 1: Specifications for systems | 90.92 | ISO/TC 138/SC 4 |
| ISO 17484-1:2006/Cor 1:2008 | 60.60 | ISO/TC 138/SC 4 |
| ISO 17484-2:2009 Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice | 60.60 | ISO/TC 138/SC 4 |
| ISO/TR 18124:2006 Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone | 90.93 | ISO/TC 138/SC 5 |
| ISO 18225:2012 Plastics piping systems -- Multilayer piping systems for outdoor gas installations -- Specifications for systems | 60.60 | ISO/TC 138/SC 4 |
| ISO/TS 18226:2006 Plastics pipes and fittings -- Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) | 90.93 | ISO/TC 138/SC 4 |
| ISO 18373-1:2007 Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature | 90.93 | ISO/TC 138/SC 5 |
| ISO 18373-2:2008 Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites | 90.93 | ISO/TC 138/SC 5 |
| ISO/NP 18488 Polyethylene pipes -- Resistance to slow crack growth -- Strain Hardening test method | 10.99 | ISO/TC 138/SC 5 |
| ISO/NP 18489 Polyethylene pipes -- Resistance to slow crack growth -- Cracked Round Bar test method | 10.99 | ISO/TC 138/SC 5 |
| ISO 18553:2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds | 90.60 | ISO/TC 138/SC 5 |
| ISO 18553:2002/Amd 1:2007 | 60.60 | ISO/TC 138/SC 5 |
| ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage -- Polyester resin concrete (PRC) -- Part 1: Pipes and fittings with flexible joints | 60.60 | ISO/TC 138/SC 6 |
| ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Styrene copolymer blends (SAN + PVC) | 90.20 | ISO/TC 138/SC 1 |
| ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water -- Training and assessment of fusion operators | 90.93 | ISO/TC 138/SC 4 |
| ISO 19893:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling | 60.60 | ISO/TC 138/SC 5 |
| ISO 19899:2010 Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test) | 60.60 | ISO/TC 138/SC 5 |
| ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 2: Pipes | 90.93 | ISO/TC 138/SC 2 |
| ISO 21003-2:2008/Amd 1:2011 | 60.60 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity | 90.92 | ISO/TC 138/SC 2 |
| ISO/TS 21003-7:2008/Amd 1:2010 | 60.60 | ISO/TC 138/SC 2 |
| ISO 21004:2006 Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply | 90.93 | ISO/TC 138/SC 2 |
| ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 1: Material specifications and performance criteria for pipes, fittings and system | 90.93 | ISO/TC 138/SC 1 |
| ISO 21138-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 2: Pipes and fittings with smooth external surface, Type A | 90.93 | ISO/TC 138/SC 1 |
| ISO 21138-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage -- Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) -- Part 3: Pipes and fittings with non-smooth external surface, Type B | 90.93 | ISO/TC 138/SC 1 |
| ISO 21307:2011 Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems | 90.92 | ISO/TC 138/SC 4 |
| ISO 21751:2011 Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test | 60.60 | ISO/TC 138/SC 5 |
| ISO 22391-2:2009 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes | 60.60 | ISO/TC 138/SC 2 |
| ISO 23228:2011 Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens | 60.60 | ISO/TC 138/SC 5 |
| ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength | 60.60 | ISO/TC 138/SC 5 |
| ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin -- Pipes with flexible joints intended to be installed using jacking techniques | 60.60 | ISO/TC 138/SC 6 |
| ISO/TS 26873:2010 Plastics pipes and fittings -- Definition and construction procedures for reference lines | 60.60 | ISO/TC 138/SC 5 |
| ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes | 60.60 | ISO/TC 138/SC 2 |
