Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile | 90.93 | ISO/TC 60 |
| ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules | 90.93 | ISO/TC 60 |
| ISO 677:1976 Straight bevel gears for general engineering and heavy engineering -- Basic rack | 90.93 | ISO/TC 60 |
| ISO 678:1976 Straight bevel gears for general engineering and heavy engineering -- Modules and diametral pitches | 90.93 | ISO/TC 60 |
| ISO 701:1998 International gear notation -- Symbols for geometrical data | 90.20 | ISO/TC 60/SC 1 |
| ISO 1122-1:1998 Vocabulary of gear terms -- Part 1: Definitions related to geometry | 90.93 | ISO/TC 60/SC 1 |
| ISO 1122-1:1998/Cor 1:1999 | 60.60 | ISO/TC 60/SC 1 |
| ISO 1122-1:1998/Cor 2:2009 | 60.60 | ISO/TC 60/SC 1 |
| ISO 1122-2:1999 Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry | 90.93 | ISO/TC 60/SC 1 |
| ISO 1328-1:1995 Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth | 90.92 | ISO/TC 60 |
| ISO 1328-1 Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth | 60.00 | ISO/TC 60 |
| ISO 1328-2:1997 Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information | 90.20 | ISO/TC 60 |
| ISO 1340:1976 Cylindrical gears -- Information to be given to the manufacturer by the purchaser in order to obtain the gear required | 90.93 | ISO/TC 60 |
| ISO 1341:1976 Straight bevel gears -- Information to be given to the manufacturer by the purchaser in order to obtain the gear required | 90.93 | ISO/TC 60 |
| ISO 2203:1973 Technical drawings -- Conventional representation of gears | 90.93 | ISO/TC 10/SC 6 |
| ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module -- Nominal dimensions | 90.93 | ISO/TC 60/SC 1 |
| ISO 4468:2009 Gear hobs -- Accuracy requirements | 60.60 | ISO/TC 60/SC 1 |
| ISO 4468:2009/Cor 1:2009 | 60.60 | ISO/TC 60/SC 1 |
| ISO 6336-1:2006 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors | 90.93 | ISO/TC 60/SC 2 |
| ISO 6336-1:2006/Cor 1:2008 | 60.60 | ISO/TC 60/SC 2 |
| ISO 6336-2:2006 Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting) | 90.93 | ISO/TC 60/SC 2 |
| ISO 6336-2:2006/Cor 1:2008 | 60.60 | ISO/TC 60/SC 2 |
| ISO 6336-3:2006 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength | 90.93 | ISO/TC 60/SC 2 |
| ISO 6336-3:2006/Cor 1:2008 | 60.60 | ISO/TC 60/SC 2 |
| ISO 6336-5:2003 Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials | 90.92 | ISO/TC 60/SC 2 |
| ISO/CD 6336-5 Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials | 30.99 | ISO/TC 60/SC 2 |
| ISO 6336-6:2006 Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load | 90.93 | ISO/TC 60/SC 2 |
| ISO 6336-6:2006/Cor 1:2007 | 60.60 | ISO/TC 60/SC 2 |
| ISO 8579-1:2002 Acceptance code for gear units -- Part 1: Test code for airborne sound | 90.20 | ISO/TC 60 |
| ISO 8579-2:1993 Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing | 90.93 | ISO/TC 60 |
| ISO 9083:2001 Calculation of load capacity of spur and helical gears -- Application to marine gears | 90.93 | ISO/TC 60/SC 2 |
| ISO 9085:2002 Calculation of load capacity of spur and helical gears -- Application for industrial gears | 90.93 | ISO/TC 60/SC 2 |
| ISO/TR 10064-1:1992 Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth | 90.92 | ISO/TC 60 |
| ISO/TR 10064-1:1992/Cor 1:2006 | 60.60 | ISO/TC 60 |
| ISO/TR 10064-2:1996 Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash | 90.93 | ISO/TC 60 |
| ISO/TR 10064-2:1996/Cor 1:2001 | 60.60 | ISO/TC 60 |
| ISO/TR 10064-2:1996/Cor 2:2006 | 60.60 | ISO/TC 60 |
| ISO/TR 10064-3:1996 Code of inspection practice -- Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes | 90.93 | ISO/TC 60 |
| ISO/TR 10064-3:1996/Cor 1:2006 | 60.60 | ISO/TC 60 |
| ISO/TR 10064-4:1998 Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking | 90.93 | ISO/TC 60 |
| ISO/TR 10064-4:1998/Cor 1:2006 | 60.60 | ISO/TC 60 |
| ISO/TR 10064-5:2005 Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments | 90.93 | ISO/TC 60 |
| ISO/TR 10064-5:2005/Cor 1:2006 | 60.60 | ISO/TC 60 |
| ISO/TR 10064-6:2009 Code of inspection practice -- Part 6: Bevel gear measurement methods | 90.93 | ISO/TC 60 |
| ISO 10300-1:2001 Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors | 90.92 | ISO/TC 60/SC 2 |
| ISO/FDIS 10300-1 Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors | 50.00 | ISO/TC 60/SC 2 |
| ISO/FDIS 10300-2 Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting) | 50.00 | ISO/TC 60/SC 2 |
| ISO 10300-2:2001 Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting) | 90.92 | ISO/TC 60/SC 2 |
| ISO/FDIS 10300-3 Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength | 50.00 | ISO/TC 60/SC 2 |
| ISO 10300-3:2001 Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength | 90.92 | ISO/TC 60/SC 2 |
| ISO 10825:1995 Gears -- Wear and damage to gear teeth -- Terminology | 90.93 | ISO/TC 60/SC 1 |
| ISO/NP TR 10828 Worm gears -- Worm profiles and gear mesh geometry | 10.99 | ISO/TC 60/SC 1 |
| ISO/TR 10828:1997 Worm gears -- Geometry of worm profiles | 90.92 | ISO/TC 60/SC 1 |
| ISO/TR 10828:1997/Cor 1:1998 | 60.60 | ISO/TC 60/SC 1 |
| ISO/TR 13593:1999 Enclosed gear drives for industrial applications | 90.93 | ISO/TC 60 |
| ISO/TR 13593:1999/Cor 1:2005 | 60.60 | ISO/TC 60 |
| ISO 13691:2001 Petroleum and natural gas industries -- High-speed special-purpose gear units | 90.93 | ISO/TC 60/SC 2 |
| ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method | 90.93 | ISO/TC 60/SC 2 |
| ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method | 90.93 | ISO/TC 60/SC 2 |
| ISO 14104:1995 Gears -- Surface temper etch inspection after grinding | 90.92 | ISO/TC 60/SC 2 |
| ISO/DIS 14104 Gears -- Surface temper etch inspection after grinding | 40.20 | ISO/TC 60/SC 2 |
| ISO/TR 14179-1:2001 Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature | 90.60 | ISO/TC 60/SC 2 |
| ISO/TR 14179-2:2001 Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity | 90.60 | ISO/TC 60/SC 2 |
| ISO/TR 14521:2010 Gears -- Calculation of load capacity of wormgears | 60.60 | ISO/TC 60/SC 1 |
| ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils | 90.93 | ISO/TC 60/SC 2 |
| ISO 14635-2:2004 Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils | 90.93 | ISO/TC 60/SC 2 |
| ISO 14635-3:2005 Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases | 90.93 | ISO/TC 60/SC 2 |
| ISO/TR 15144-1:2010 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles | 60.60 | ISO/TC 60/SC 2 |
| ISO/DTR 15144-2 Calculation of micro-pitting load capacity of cylindrical spur and helical gears -- Part 2: Examples of calculation for micropitting | 30.20 | ISO/TC 60/SC 2 |
| ISO 17485:2006 Bevel gears -- ISO system of accuracy | 90.93 | ISO/TC 60 |
| ISO 18653:2003 Gears -- Evaluation of instruments for the measurement of individual gears | 90.93 | ISO/TC 60 |
| ISO/TR 18792:2008 Lubrication of industrial gear drives | 90.60 | ISO/TC 60/SC 2 |
| ISO 21771:2007 Gears -- Cylindrical involute gears and gear pairs -- Concepts and geometry | 90.93 | ISO/TC 60/SC 1 |
| ISO/TR 22849:2011 Design recommendations for bevel gears | 60.60 | ISO/TC 60/SC 2 |
| ISO 23509:2006 Bevel and hypoid gear geometry | 90.92 | ISO/TC 60/SC 2 |
| IEC 61400-4:2012 Wind turbines -- Part 4: Design requirements for wind turbine gearboxes | 60.60 | ISO/TC 60 |
