Participation in TCs

Brazil (ABNT)

JTC 1 - Information technology ( O-Member )
JTC 1/SC 7 - Software and systems engineering ( P-Member )
JTC 1/SC 27 - IT Security techniques ( P-Member )
JTC 1/SC 28 - Office equipment ( O-Member )
JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information ( P-Member )
JTC 1/SC 31 - Automatic identification and data capture techniques ( P-Member )
JTC 1/SC 34 - Document description and processing languages ( P-Member )
TC 2 - Fasteners ( O-Member )
TC 2/SC 1 - Mechanical properties of fasteners ( O-Member )
TC 2/SC 7 - Reference standards for fasteners (mainly covering terminology, dimensioning, sizes and tolerancing) ( O-Member )
TC 4 - Rolling bearings ( O-Member )
TC 4/SC 4 - Tolerances ( O-Member )
TC 4/SC 5 - Needle roller bearings ( O-Member )
TC 4/SC 6 - Insert bearings and accessories ( O-Member )
TC 4/SC 7 - Spherical plain bearings ( O-Member )
TC 4/SC 8 - Load ratings and life ( O-Member )
TC 4/SC 9 - Tapered roller bearings ( O-Member )
TC 4/SC 11 - Linear motion rolling bearings ( O-Member )
TC 5 - Ferrous metal pipes and metallic fittings ( O-Member )
TC 5/SC 5 - Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges ( P-Member )
TC 6 - Paper, board and pulps ( P-Member )
TC 6/SC 2 - Test methods and quality specifications for paper and board ( P-Member )
TC 6/SC 5 - Test methods and quality specifications for pulps ( P-Member )
TC 10 - Technical product documentation ( P-Member )
TC 10/SC 1 - Basic conventions ( P-Member )
TC 10/SC 6 - Mechanical engineering documentation ( P-Member )
TC 10/SC 8 - Construction documentation ( O-Member )
TC 10/SC 10 - Process plant documentation and tpd-symbols ( O-Member )
TC 11 - Boilers and pressure vessels ( P-Member )
TC 12 - Quantities and units ( O-Member )
TC 14 - Shafts for machinery and accessories ( O-Member )
TC 17 - Steel ( O-Member )
TC 17/SC 1 - Methods of determination of chemical composition ( O-Member )
TC 17/SC 3 - Steels for structural purposes ( O-Member )
TC 17/SC 4 - Heat treatable and alloy steels ( O-Member )
TC 17/SC 7 - Methods of testing (other than mechanical tests and chemical analysis) ( O-Member )
TC 17/SC 10 - Steel for pressure purposes ( O-Member )
TC 17/SC 12 - Continuous mill flat rolled products ( O-Member )
TC 17/SC 16 - Steels for the reinforcement and prestressing of concrete ( P-Member )
TC 17/SC 17 - Steel wire rod and wire products ( O-Member )
TC 17/SC 19 - Technical delivery conditions for steel tubes for pressure purposes ( P-Member )
TC 17/SC 20 - General technical delivery conditions, sampling and mechanical testing methods ( O-Member )
TC 20 - Aircraft and space vehicles ( P-Member )
TC 20/SC 1 - Aerospace electrical requirements ( O-Member )
TC 20/SC 4 - Aerospace fastener systems ( O-Member )
TC 20/SC 6 - Standard atmosphere ( O-Member )
TC 20/SC 8 - Aerospace terminology ( O-Member )
TC 20/SC 9 - Air cargo and ground equipment ( P-Member )
TC 20/SC 10 - Aerospace fluid systems and components ( O-Member )
TC 20/SC 13 - Space data and information transfer systems ( P-Member )
TC 20/SC 14 - Space systems and operations ( P-Member )
TC 20/SC 15 - Airframe bearings ( O-Member )
TC 21 - Equipment for fire protection and fire fighting ( P-Member )
TC 22 - Road vehicles ( P-Member )
TC 22/SC 1 - Ignition equipment ( P-Member )
TC 22/SC 2 - Braking systems and equipment ( P-Member )
TC 22/SC 3 - Electrical and electronic equipment ( P-Member )
TC 22/SC 4 - Caravans and light trailers ( O-Member )
TC 22/SC 5 - Engine tests ( P-Member )
TC 22/SC 7 - Injection equipment and filters for use on road vehicles ( P-Member )
TC 22/SC 8 - Lighting and signalling ( P-Member )
TC 22/SC 9 - Vehicle dynamics and road-holding ability ( P-Member )
TC 22/SC 10 - Impact test procedures ( P-Member )
TC 22/SC 11 - Safety glazing materials ( P-Member )
TC 22/SC 12 - Passive safety crash protection systems ( P-Member )
TC 22/SC 13 - Ergonomics applicable to road vehicles ( P-Member )
TC 22/SC 15 - Interchangeability of components of commercial vehicles and buses ( P-Member )
TC 22/SC 17 - Visibility ( P-Member )
TC 22/SC 19 - Wheels ( P-Member )
TC 22/SC 21 - Electrically propelled road vehicles ( P-Member )
TC 22/SC 22 - Motorcycles ( P-Member )
TC 22/SC 23 - Mopeds ( P-Member )
TC 23 - Tractors and machinery for agriculture and forestry ( P-Member )
TC 23/SC 2 - Common tests ( P-Member )
TC 23/SC 3 - Safety and comfort ( P-Member )
TC 23/SC 4 - Tractors ( P-Member )
TC 23/SC 6 - Equipment for crop protection ( P-Member )
TC 23/SC 13 - Powered lawn and garden equipment ( O-Member )
TC 23/SC 14 - Operator controls, operator symbols and other displays, operator manuals ( P-Member )
TC 23/SC 15 - Machinery for forestry ( O-Member )
TC 23/SC 17 - Manually portable forest machinery ( O-Member )
TC 23/SC 18 - Irrigation and drainage equipment and systems ( P-Member )
TC 23/SC 19 - Agricultural electronics ( P-Member )
TC 24 - Particle characterization including sieving ( O-Member )
TC 24/SC 4 - Particle characterization ( O-Member )
TC 24/SC 8 - Test sieves, sieving and industrial screens ( O-Member )
TC 26 - Copper and copper alloys ( O-Member )
TC 28 - Petroleum products and lubricants ( P-Member )
TC 28/SC 1 - Terminology ( O-Member )
TC 28/SC 2 - Measurement of petroleum and related products ( O-Member )
TC 28/SC 4 - Classifications and specifications ( P-Member )
TC 28/SC 5 - Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels ( O-Member )
TC 28/SC 7 - Liquid Biofuels ( P-Member )
TC 29 - Small tools ( O-Member )
TC 29/SC 2 - High speed steel cutting tools and their attachments ( O-Member )
TC 29/SC 5 - Grinding wheels and abrasives ( O-Member )
TC 29/SC 8 - Tools for pressing and moulding ( O-Member )
TC 29/SC 9 - Tools with cutting edges made of hard cutting materials ( O-Member )
TC 29/SC 10 - Assembly tools for screws and nuts, pliers and nippers ( O-Member )
TC 30 - Measurement of fluid flow in closed conduits ( P-Member )
TC 30/SC 2 - Pressure differential devices ( P-Member )
TC 30/SC 5 - Velocity and mass methods ( P-Member )
TC 30/SC 7 - Volume methods including water meters ( P-Member )
TC 31 - Tyres, rims and valves ( O-Member )
TC 31/SC 3 - Passenger car tyres and rims ( O-Member )
TC 31/SC 4 - Truck and bus tyres and rims ( O-Member )
TC 31/SC 5 - Agricultural tyres and rims ( O-Member )
TC 31/SC 6 - Off-the-road tyres and rims ( O-Member )
TC 31/SC 7 - Industrial tyres and rims ( O-Member )
TC 31/SC 8 - Aircraft tyres and rims ( O-Member )
TC 31/SC 9 - Valves for tube and tubeless tyres ( O-Member )
TC 31/SC 10 - Cycle, moped, motorcycle tyres and rims ( O-Member )
TC 34 - Food products ( Secretariat )
TC 34/SC 5 - Milk and milk products ( O-Member )
TC 34/SC 6 - Meat, poultry, fish, eggs and their products ( O-Member )
TC 34/SC 15 - Coffee ( Secretariat )
TC 38 - Textiles ( P-Member )
TC 38/SC 1 - Tests for coloured textiles and colorants ( O-Member )
TC 38/SC 20 - Fabric descriptions ( O-Member )
TC 38/SC 23 - Fibres and yarns ( O-Member )
TC 39 - Machine tools ( P-Member )
TC 39/SC 2 - Test conditions for metal cutting machine tools ( P-Member )
TC 39/SC 4 - Woodworking machines ( P-Member )
TC 39/SC 6 - Noise of machine tools ( P-Member )
TC 39/SC 8 - Work holding spindles and chucks ( P-Member )
TC 41 - Pulleys and belts (including veebelts) ( O-Member )
TC 41/SC 1 - Friction ( O-Member )
TC 41/SC 3 - Conveyor belts ( O-Member )
TC 41/SC 4 - Synchronous belt drives ( O-Member )
TC 42 - Photography ( O-Member )
TC 43 - Acoustics ( O-Member )
TC 43/SC 1 - Noise ( O-Member )
TC 45 - Rubber and rubber products ( P-Member )
TC 45/SC 1 - Hoses (rubber and plastics) ( P-Member )
TC 45/SC 2 - Testing and analysis ( P-Member )
TC 45/SC 3 - Raw materials (including latex) for use in the rubber industry ( Secretariat )
TC 45/SC 4 - Products (other than hoses) ( P-Member )
TC 46 - Information and documentation ( O-Member )
TC 46/SC 4 - Technical interoperability ( O-Member )
TC 46/SC 8 - Quality - Statistics and performance evaluation ( O-Member )
TC 46/SC 9 - Identification and description ( O-Member )
TC 46/SC 11 - Archives/records management ( O-Member )
TC 47 - Chemistry ( O-Member )
TC 47/SC 1 - General methods ( O-Member )
TC 48 - Laboratory equipment ( O-Member )
TC 48/SC 3 - Thermometers ( O-Member )
TC 48/SC 4 - Density measuring instruments ( O-Member )
TC 48/SC 5 - Quality of glassware ( O-Member )
TC 48/SC 6 - Laboratory and volumetric ware ( O-Member )
TC 52 - Light gauge metal containers ( O-Member )
TC 52/SC 4 - Open top containers ( O-Member )
TC 52/SC 5 - General use containers ( O-Member )
TC 52/SC 6 - Aerosol containers ( O-Member )
TC 58 - Gas cylinders ( O-Member )
TC 58/SC 2 - Cylinder fittings ( O-Member )
TC 58/SC 3 - Cylinder design ( O-Member )
TC 58/SC 4 - Operational requirements for gas cylinders ( O-Member )
TC 59 - Building construction ( O-Member )
TC 59/SC 14 - Design life ( P-Member )
TC 59/SC 16 - Accessibility and usability of the built environment ( P-Member )
TC 59/SC 17 - Sustainability in building construction ( O-Member )
TC 60 - Gears ( O-Member )
TC 60/SC 1 - Nomenclature and wormgearing ( O-Member )
TC 60/SC 2 - Gear capacity calculation ( O-Member )
TC 61 - Plastics ( O-Member )
TC 61/SC 1 - Terminology ( O-Member )
TC 61/SC 5 - Physical-chemical properties ( O-Member )
TC 61/SC 9 - Thermoplastic materials ( O-Member )
TC 61/SC 11 - Products ( P-Member )
TC 61/SC 12 - Thermosetting materials ( O-Member )
TC 61/SC 13 - Composites and reinforcement fibres ( O-Member )
TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ( P-Member )
TC 67/SC 2 - Pipeline transportation systems ( P-Member )
TC 67/SC 3 - Drilling and completion fluids, and well cements ( P-Member )
TC 67/SC 4 - Drilling and production equipment ( P-Member )
TC 67/SC 5 - Casing, tubing and drill pipe ( P-Member )
TC 67/SC 6 - Processing equipment and systems ( P-Member )
TC 67/SC 7 - Offshore structures ( P-Member )
TC 68 - Financial services ( P-Member )
TC 68/SC 2 - Security management and general banking operations ( O-Member )
TC 68/SC 4 - Securities and related financial instruments ( P-Member )
TC 68/SC 7 - Core banking ( O-Member )
TC 69 - Applications of statistical methods ( O-Member )
TC 69/SC 1 - Terminology and symbols ( O-Member )
TC 69/SC 4 - Applications of statistical methods in process management ( P-Member )
TC 69/SC 5 - Acceptance sampling ( O-Member )
TC 69/SC 6 - Measurement methods and results ( O-Member )
TC 70 - Internal combustion engines ( O-Member )
TC 70/SC 7 - Tests for lubricating oil filters ( O-Member )
TC 70/SC 8 - Exhaust gas emission measurement ( O-Member )
TC 71 - Concrete, reinforced concrete and pre-stressed concrete ( P-Member )
TC 71/SC 1 - Test methods for concrete ( P-Member )
TC 71/SC 3 - Concrete production and execution of concrete structures ( P-Member )
TC 71/SC 4 - Performance requirements for structural concrete ( P-Member )
TC 71/SC 5 - Simplified design standard for concrete structures ( P-Member )
TC 71/SC 6 - Non-traditional reinforcing materials for concrete structures ( P-Member )
TC 71/SC 7 - Maintenance and repair of concrete structures ( P-Member )
TC 71/SC 8 - Environmental management for concrete and concrete structures ( P-Member )
TC 72 - Textile machinery and accessories ( O-Member )
TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories ( O-Member )
TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories ( O-Member )
TC 72/SC 4 - Dyeing and finishing machinery and accessories ( O-Member )
TC 72/SC 5 - Industrial laundry and dry-cleaning machinery and accessories ( O-Member )
TC 72/SC 7 - Data interfaces for monitoring and control of textile machinery ( O-Member )
TC 72/SC 8 - Safety requirements for textile machinery ( O-Member )
TC 72/SC 9 - Graphical symbols for textile machinery ( O-Member )
TC 74 - Cement and lime ( P-Member )
TC 76 - Transfusion, infusion and injection equipment for medical and pharmaceutical use ( P-Member )
TC 77 - Products in fibre reinforced cement ( P-Member )
TC 79 - Light metals and their alloys ( O-Member )
TC 79/SC 2 - Organic and anodic oxidation coatings on aluminium ( O-Member )
TC 79/SC 4 - Unalloyed (refined) aluminium ingots ( O-Member )
TC 79/SC 5 - Magnesium and alloys of cast or wrought magnesium ( O-Member )
TC 79/SC 6 - Wrought aluminium and aluminium alloys ( O-Member )
TC 79/SC 7 - Aluminium and cast aluminium alloys ( O-Member )
TC 79/SC 9 - Symbolization ( O-Member )
TC 81 - Common names for pesticides and other agrochemicals ( O-Member )
TC 84 - Devices for administration of medicinal products and intravascular catheters ( P-Member )
TC 86 - Refrigeration and air-conditioning ( O-Member )
TC 86/SC 1 - Safety and environmental requirements for refrigerating systems ( O-Member )
TC 86/SC 2 - Terms and definitions ( O-Member )
TC 86/SC 3 - Testing and rating of factory-made refrigeration systems (excluding systems covered by ISO/TC 86/ SC 5, SC 6 and SC 7) ( O-Member )
TC 86/SC 4 - Testing and rating of refrigerant compressors ( O-Member )
TC 86/SC 7 - Testing and rating of commercial refrigerated display cabinets ( O-Member )
TC 91 - Surface active agents ( O-Member )
TC 92 - Fire safety ( P-Member )
TC 92/SC 3 - Fire threat to people and environment ( P-Member )
TC 94 - Personal safety -- Protective clothing and equipment ( O-Member )
TC 94/SC 1 - Head protection ( O-Member )
TC 94/SC 3 - Foot protection ( O-Member )
TC 94/SC 4 - Personal equipment for protection against falls ( O-Member )
TC 94/SC 6 - Eye and face protection ( O-Member )
TC 94/SC 12 - Hearing protection ( O-Member )
TC 94/SC 13 - Protective clothing ( O-Member )
TC 94/SC 15 - Respiratory protective devices ( P-Member )
TC 96 - Cranes ( O-Member )
TC 96/SC 2 - Terminology ( O-Member )
TC 96/SC 3 - Selection of wire ropes ( P-Member )
TC 96/SC 4 - Test methods ( O-Member )
TC 96/SC 5 - Use, operation and maintenance ( O-Member )
TC 100 - Chains and chain sprockets for power transmission and conveyors ( O-Member )
TC 101 - Continuous mechanical handling equipment ( O-Member )
TC 102 - Iron ore and direct reduced iron ( P-Member )
TC 102/SC 1 - Sampling ( P-Member )
TC 102/SC 2 - Chemical analysis ( P-Member )
TC 102/SC 3 - Physical testing ( Secretariat )
TC 104 - Freight containers ( O-Member )
TC 104/SC 1 - General purpose containers ( O-Member )
TC 104/SC 2 - Specific purpose containers ( O-Member )
TC 104/SC 4 - Identification and communication ( O-Member )
TC 105 - Steel wire ropes ( P-Member )
TC 106 - Dentistry ( O-Member )
TC 106/SC 1 - Filling and restorative materials ( O-Member )
TC 106/SC 2 - Prosthodontic materials ( P-Member )
TC 106/SC 3 - Terminology ( O-Member )
TC 106/SC 4 - Dental instruments ( O-Member )
TC 106/SC 6 - Dental equipment ( O-Member )
TC 106/SC 7 - Oral care products ( O-Member )
TC 106/SC 8 - Dental implants ( O-Member )
TC 107 - Metallic and other inorganic coatings ( O-Member )
TC 107/SC 3 - Electrodeposited coatings and related finishes ( O-Member )
TC 107/SC 4 - Hot dip coatings (galvanized, etc.) ( O-Member )
TC 107/SC 7 - Corrosion tests ( O-Member )
TC 107/SC 8 - Chemical conversion coatings ( O-Member )
TC 108 - Mechanical vibration, shock and condition monitoring ( O-Member )
TC 108/SC 2 - Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures ( O-Member )
TC 108/SC 3 - Use and calibration of vibration and shock measuring instruments ( O-Member )
TC 108/SC 4 - Human exposure to mechanical vibration and shock ( O-Member )
TC 108/SC 5 - Condition monitoring and diagnostics of machines ( O-Member )
TC 108/SC 6 - Vibration and shock generating systems ( O-Member )
TC 111 - Round steel link chains, chain slings, components and accessories ( P-Member )
TC 111/SC 1 - Chains and chain slings ( P-Member )
TC 111/SC 3 - Components and accessories ( P-Member )
TC 113 - Hydrometry ( O-Member )
TC 113/SC 1 - Velocity area methods ( O-Member )
TC 113/SC 2 - Flow measurement structures ( O-Member )
TC 113/SC 5 - Instruments, equipment and data management ( O-Member )
TC 113/SC 6 - Sediment transport ( O-Member )
TC 113/SC 8 - Ground water ( O-Member )
TC 115 - Pumps ( P-Member )
TC 115/SC 1 - Dimensions and technical specifications of pumps ( P-Member )
TC 115/SC 2 - Methods of measurement and testing ( P-Member )
TC 115/SC 3 - Installation and special application ( P-Member )
TC 117 - Fans ( O-Member )
TC 118 - Compressors and pneumatic tools, machines and equipment ( O-Member )
TC 118/SC 1 - Process compressors ( P-Member )
TC 118/SC 3 - Pneumatic tools and machines ( O-Member )
TC 118/SC 4 - Quality of compressed air ( O-Member )
TC 120 - Leather ( O-Member )
TC 120/SC 1 - Raw hides and skins, including pickled pelts ( O-Member )
TC 120/SC 2 - Tanned leather ( O-Member )
TC 121 - Anaesthetic and respiratory equipment ( P-Member )
TC 121/SC 1 - Breathing attachments and anaesthetic machines ( P-Member )
TC 121/SC 2 - Airways and related equipment ( P-Member )
TC 121/SC 3 - Lung ventilators and related equipment ( P-Member )
TC 121/SC 4 - Anaesthesia terminology ( P-Member )
TC 121/SC 6 - Medical gas systems ( O-Member )
TC 121/SC 8 - Suction devices for hospital and emergency care use ( O-Member )
TC 123 - Plain bearings ( O-Member )
TC 123/SC 2 - Materials and lubricants, their properties, characteristics, test methods and testing conditions ( O-Member )
TC 123/SC 3 - Dimensions, tolerances and construction details ( O-Member )
TC 123/SC 4 - Methods of calculation of plain bearings ( O-Member )
TC 123/SC 5 - Quality analysis and assurance ( O-Member )
TC 126 - Tobacco and tobacco products ( P-Member )
TC 126/SC 1 - Physical and dimensional tests ( P-Member )
TC 126/SC 2 - Leaf tobacco ( P-Member )
TC 127 - Earth-moving machinery ( P-Member )
TC 127/SC 1 - Test methods relating to safety and machine performance ( P-Member )
TC 127/SC 2 - Safety, ergonomics and general requirements ( P-Member )
TC 127/SC 3 - Machine characteristics, electrical and electronic systems, operation and maintenance ( P-Member )
TC 127/SC 4 - Terminology, commercial nomenclature, classification and ratings ( P-Member )
TC 130 - Graphic technology ( P-Member )
TC 131 - Fluid power systems ( P-Member )
TC 131/SC 1 - Terminology, classification and symbols ( O-Member )
TC 131/SC 2 - Pumps, motors and integral transmissions ( O-Member )
TC 131/SC 3 - Cylinders ( O-Member )
TC 131/SC 4 - Connectors and similar products and components ( O-Member )
TC 131/SC 5 - Control products and components ( O-Member )
TC 131/SC 6 - Contamination control ( O-Member )
TC 131/SC 7 - Sealing devices ( O-Member )
TC 131/SC 8 - Product testing ( O-Member )
TC 131/SC 9 - Installations and systems ( O-Member )
TC 134 - Fertilizers and soil conditioners ( O-Member )
TC 135 - Non-destructive testing ( P-Member )
TC 135/SC 2 - Surface methods ( P-Member )
TC 135/SC 3 - Ultrasonic testing ( P-Member )
TC 135/SC 4 - Eddy current methods ( P-Member )
TC 135/SC 5 - Radiation methods ( P-Member )
TC 135/SC 6 - Leak detection methods ( P-Member )
TC 135/SC 7 - Personnel qualification ( P-Member )
TC 135/SC 8 - Infrared thermography for non-destructive testing ( P-Member )
TC 135/SC 9 - Acoustic emission testing ( Secretariat )
TC 137 - Footwear sizing designations and marking systems ( O-Member )
TC 142 - Cleaning equipment for air and other gases ( O-Member )
TC 145 - Graphical symbols ( O-Member )
TC 145/SC 1 - Public information symbols ( O-Member )
TC 145/SC 2 - Safety identification, signs, shapes, symbols and colours ( O-Member )
TC 148 - Sewing machines ( O-Member )
TC 149 - Cycles ( P-Member )
TC 149/SC 1 - Cycles and major sub-assemblies ( P-Member )
TC 150 - Implants for surgery ( P-Member )
TC 150/SC 1 - Materials ( P-Member )
TC 150/SC 2 - Cardiovascular implants and extracorporeal systems ( P-Member )
TC 150/SC 3 - Neurosurgical implants ( O-Member )
TC 150/SC 4 - Bone and joint replacements ( P-Member )
TC 150/SC 5 - Osteosynthesis and spinal devices ( P-Member )
TC 153 - Valves ( P-Member )
TC 153/SC 1 - Design, manufacture, marking and testing ( P-Member )
TC 153/SC 2 - Valve actuator attachment ( P-Member )
TC 155 - Nickel and nickel alloys ( P-Member )
TC 155/SC 3 - Analysis of nickel, ferronickel and nickel alloys ( P-Member )
TC 156 - Corrosion of metals and alloys ( P-Member )
TC 157 - Mechanical contraceptives ( P-Member )
TC 158 - Analysis of gases ( O-Member )
TC 159 - Ergonomics ( O-Member )
TC 159/SC 1 - General ergonomics principles ( O-Member )
TC 159/SC 3 - Anthropometry and biomechanics ( O-Member )
TC 159/SC 4 - Ergonomics of human-system interaction ( P-Member )
TC 159/SC 5 - Ergonomics of the physical environment ( P-Member )
TC 160 - Glass in building ( O-Member )
TC 160/SC 1 - Product considerations ( O-Member )
TC 160/SC 2 - Use considerations ( O-Member )
TC 164 - Mechanical testing of metals ( P-Member )
TC 164/SC 1 - Uniaxial testing ( P-Member )
TC 164/SC 2 - Ductility testing ( P-Member )
TC 164/SC 3 - Hardness testing ( P-Member )
TC 164/SC 4 - Toughness testing -- Fracture (F), Pendulum (P), Tear (T) ( P-Member )
TC 164/SC 5 - Fatigue testing ( O-Member )
TC 168 - Prosthetics and orthotics ( O-Member )
TC 170 - Surgical instruments ( O-Member )
TC 173 - Assistive products for persons with disability ( O-Member )
TC 173/SC 1 - Wheelchairs ( O-Member )
TC 173/SC 2 - Classification and terminology ( O-Member )
TC 173/SC 3 - Aids for ostomy and incontinence ( O-Member )
TC 173/SC 6 - Hoists for transfer of persons ( O-Member )
TC 174 - Jewellery ( P-Member )
TC 176 - Quality management and quality assurance ( P-Member )
TC 176/SC 1 - Concepts and terminology ( P-Member )
TC 176/SC 2 - Quality systems ( P-Member )
TC 176/SC 3 - Supporting technologies ( P-Member )
TC 177 - Caravans ( O-Member )
TC 178 - Lifts, escalators and moving walks ( P-Member )
TC 180 - Solar energy ( O-Member )
TC 180/SC 4 - Systems - Thermal performance, reliability and durability ( O-Member )
TC 180/SC 5 - Collectors and other components ( O-Member )
TC 181 - Safety of toys ( P-Member )
TC 183 - Copper, lead, zinc and nickel ores and concentrates ( P-Member )
TC 184 - Automation systems and integration ( O-Member )
TC 184/SC 4 - Industrial data ( P-Member )
TC 185 - Safety devices for protection against excessive pressure ( O-Member )
TC 189 - Ceramic tile ( P-Member )
TC 193 - Natural gas ( O-Member )
TC 193/SC 1 - Analysis of natural gas ( O-Member )
TC 194 - Biological evaluation of medical devices ( P-Member )
TC 194/SC 1 - Tissue product safety ( O-Member )
TC 195 - Building construction machinery and equipment ( P-Member )
TC 195/SC 1 - Machinery and equipment for concrete work ( P-Member )
TC 197 - Hydrogen technologies ( P-Member )
TC 198 - Sterilization of health care products ( P-Member )
TC 199 - Safety of machinery ( P-Member )
TC 201 - Surface chemical analysis ( O-Member )
TC 201/SC 1 - Terminology ( O-Member )
TC 201/SC 2 - General procedures ( O-Member )
TC 201/SC 3 - Data management and treatment ( O-Member )
TC 201/SC 4 - Depth profiling ( O-Member )
TC 201/SC 5 - Auger electron spectroscopy ( O-Member )
TC 201/SC 7 - X-ray photoelectron spectroscopy ( O-Member )
TC 201/SC 8 - Glow discharge spectroscopy ( O-Member )
TC 207 - Environmental management ( P-Member )
TC 207/SC 1 - Environmental management systems ( P-Member )
TC 207/SC 2 - Environmental auditing and related environmental investigations ( P-Member )
TC 207/SC 3 - Environmental labelling ( P-Member )
TC 207/SC 4 - Environmental performance evaluation ( P-Member )
TC 207/SC 5 - Life cycle assessment ( P-Member )
TC 207/SC 7 - Green house gas management and related activities ( P-Member )
TC 209 - Cleanrooms and associated controlled environments ( P-Member )
TC 210 - Quality management and corresponding general aspects for medical devices ( P-Member )
TC 212 - Clinical laboratory testing and in vitro diagnostic test systems ( P-Member )
TC 213 - Dimensional and geometrical product specifications and verification ( P-Member )
TC 214 - Elevating work platforms ( P-Member )
TC 215 - Health informatics ( P-Member )
TC 216 - Footwear ( O-Member )
TC 217 - Cosmetics ( O-Member )
TC 223 - Societal Security ( O-Member )
TC 225 - Market, opinion and social research ( P-Member )
TC 226 - Materials for the production of primary aluminium ( O-Member )
TC 227 - Springs ( O-Member )
TC 228 - Tourism and related services ( P-Member )
TC 229 - Nanotechnologies ( P-Member )
TC 234 - Fisheries and aquaculture ( O-Member )
TC 236 - Project Committee: Project Management ( P-Member )
TC 240 - Project Committee: Product recall ( P-Member )
TC 242 - Project Committee: Energy Management ( Secretariat )
TC 243 - Project Committee: Consumer product safety ( P-Member )
TC 247 - Fraud countermeasures and controls ( P-Member )
TC 248 - Project committee: Sustainability criteria for bioenergy ( Secretariat )
TC 249 - Traditional chinese medicine ( O-Member )
TC 250 - Project committee: Sustainability in event management ( Secretariat )
ISO/IEC/JTC 2 - Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ( P-Member )