Participation in TCs

Austria (ASI)

JTC 1 - Information technology ( O-Member )
JTC 1/SC 2 - Coded character sets ( P-Member )
JTC 1/SC 6 - Telecommunications and information exchange between systems ( O-Member )
JTC 1/SC 7 - Software and systems engineering ( O-Member )
JTC 1/SC 17 - Cards and personal identification ( P-Member )
JTC 1/SC 22 - Programming languages, their environments and system software interfaces ( P-Member )
JTC 1/SC 24 - Computer graphics, image processing and environmental data representation ( O-Member )
JTC 1/SC 25 - Interconnection of information technology equipment ( P-Member )
JTC 1/SC 27 - IT Security techniques ( P-Member )
JTC 1/SC 28 - Office equipment ( P-Member )
JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information ( O-Member )
JTC 1/SC 31 - Automatic identification and data capture techniques ( P-Member )
JTC 1/SC 32 - Data management and interchange ( O-Member )
JTC 1/SC 34 - Document description and processing languages ( O-Member )
JTC 1/SC 35 - User interfaces ( P-Member )
JTC 1/SC 37 - Biometrics ( O-Member )
TC 1 - Screw threads ( P-Member )
TC 2 - Fasteners ( P-Member )
TC 2/SC 1 - Mechanical properties of fasteners ( P-Member )
TC 2/SC 7 - Reference standards for fasteners (mainly covering terminology, dimensioning, sizes and tolerancing) ( P-Member )
TC 4 - Rolling bearings ( P-Member )
TC 4/SC 4 - Tolerances ( P-Member )
TC 4/SC 5 - Needle roller bearings ( P-Member )
TC 4/SC 6 - Insert bearings and accessories ( P-Member )
TC 4/SC 7 - Spherical plain bearings ( P-Member )
TC 4/SC 8 - Load ratings and life ( P-Member )
TC 4/SC 9 - Tapered roller bearings ( P-Member )
TC 4/SC 11 - Linear motion rolling bearings ( P-Member )
TC 5 - Ferrous metal pipes and metallic fittings ( P-Member )
TC 5/SC 2 - Cast iron pipes, fittings and their joints ( P-Member )
TC 5/SC 5 - Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges ( P-Member )
TC 5/SC 10 - Metallic flanges and their joints ( P-Member )
TC 5/SC 11 - Metal hoses and expansion joints ( P-Member )
TC 6 - Paper, board and pulps ( O-Member )
TC 6/SC 2 - Test methods and quality specifications for paper and board ( O-Member )
TC 6/SC 5 - Test methods and quality specifications for pulps ( O-Member )
TC 8 - Ships and marine technology ( O-Member )
TC 8/SC 1 - Lifesaving and fire protection ( O-Member )
TC 8/SC 4 - Outfitting and deck machinery ( O-Member )
TC 8/SC 7 - Inland navigation vessels ( O-Member )
TC 8/SC 9 - General requirements ( O-Member )
TC 10 - Technical product documentation ( O-Member )
TC 10/SC 1 - Basic conventions ( O-Member )
TC 10/SC 6 - Mechanical engineering documentation ( O-Member )
TC 10/SC 8 - Construction documentation ( O-Member )
TC 10/SC 10 - Process plant documentation and tpd-symbols ( O-Member )
TC 11 - Boilers and pressure vessels ( P-Member )
TC 12 - Quantities and units ( P-Member )
TC 14 - Shafts for machinery and accessories ( O-Member )
TC 17 - Steel ( P-Member )
TC 17/SC 1 - Methods of determination of chemical composition ( P-Member )
TC 17/SC 3 - Steels for structural purposes ( P-Member )
TC 17/SC 4 - Heat treatable and alloy steels ( P-Member )
TC 17/SC 7 - Methods of testing (other than mechanical tests and chemical analysis) ( P-Member )
TC 17/SC 10 - Steel for pressure purposes ( P-Member )
TC 17/SC 11 - Steel castings ( P-Member )
TC 17/SC 12 - Continuous mill flat rolled products ( P-Member )
TC 17/SC 16 - Steels for the reinforcement and prestressing of concrete ( P-Member )
TC 17/SC 17 - Steel wire rod and wire products ( P-Member )
TC 17/SC 19 - Technical delivery conditions for steel tubes for pressure purposes ( P-Member )
TC 17/SC 20 - General technical delivery conditions, sampling and mechanical testing methods ( P-Member )
TC 18 - Zinc and zinc alloys ( O-Member )
TC 19 - Preferred numbers ( O-Member )
TC 20 - Aircraft and space vehicles ( O-Member )
TC 20/SC 9 - Air cargo and ground equipment ( O-Member )
TC 21 - Equipment for fire protection and fire fighting ( O-Member )
TC 21/SC 2 - Manually transportable fire extinguishers ( O-Member )
TC 21/SC 3 - Fire detection and alarm systems ( O-Member )
TC 21/SC 5 - Fixed firefighting systems using water ( P-Member )
TC 21/SC 6 - Foam and powder media and fixed firefighting systems using foam and powder ( O-Member )
TC 21/SC 8 - Gaseous media and firefighting systems using gas ( P-Member )
TC 21/SC 11 - Smoke and heat control systems and components ( P-Member )
TC 22 - Road vehicles ( O-Member )
TC 22/SC 2 - Braking systems and equipment ( O-Member )
TC 22/SC 3 - Electrical and electronic equipment ( P-Member )
TC 22/SC 4 - Caravans and light trailers ( O-Member )
TC 22/SC 5 - Engine tests ( O-Member )
TC 22/SC 12 - Passive safety crash protection systems ( O-Member )
TC 22/SC 19 - Wheels ( O-Member )
TC 22/SC 21 - Electrically propelled road vehicles ( P-Member )
TC 22/SC 22 - Motorcycles ( O-Member )
TC 23 - Tractors and machinery for agriculture and forestry ( O-Member )
TC 23/SC 2 - Common tests ( P-Member )
TC 23/SC 3 - Safety and comfort ( O-Member )
TC 23/SC 4 - Tractors ( O-Member )
TC 23/SC 15 - Machinery for forestry ( P-Member )
TC 23/SC 17 - Manually portable forest machinery ( O-Member )
TC 23/SC 19 - Agricultural electronics ( P-Member )
TC 24 - Particle characterization including sieving ( P-Member )
TC 24/SC 4 - Particle characterization ( P-Member )
TC 24/SC 8 - Test sieves, sieving and industrial screens ( P-Member )
TC 25 - Cast irons and pig irons ( P-Member )
TC 26 - Copper and copper alloys ( P-Member )
TC 27 - Solid mineral fuels ( O-Member )
TC 27/SC 1 - Coal preparation: Terminology and performance ( O-Member )
TC 27/SC 3 - Coke ( O-Member )
TC 27/SC 4 - Sampling ( O-Member )
TC 28 - Petroleum products and lubricants ( P-Member )
TC 28/SC 1 - Terminology ( O-Member )
TC 28/SC 2 - Measurement of petroleum and related products ( P-Member )
TC 28/SC 4 - Classifications and specifications ( O-Member )
TC 29 - Small tools ( P-Member )
TC 29/SC 2 - High speed steel cutting tools and their attachments ( O-Member )
TC 29/SC 5 - Grinding wheels and abrasives ( P-Member )
TC 29/SC 8 - Tools for pressing and moulding ( O-Member )
TC 29/SC 9 - Tools with cutting edges made of hard cutting materials ( O-Member )
TC 29/SC 10 - Assembly tools for screws and nuts, pliers and nippers ( O-Member )
TC 30 - Measurement of fluid flow in closed conduits ( O-Member )
TC 30/SC 5 - Velocity and mass methods ( O-Member )
TC 30/SC 7 - Volume methods including water meters ( P-Member )
TC 31 - Tyres, rims and valves ( O-Member )
TC 33 - Refractories ( P-Member )
TC 34 - Food products ( O-Member )
TC 34/SC 3 - Fruit and vegetable products ( O-Member )
TC 34/SC 8 - Tea ( O-Member )
TC 34/SC 9 - Microbiology ( P-Member )
TC 34/SC 11 - Animal and vegetable fats and oils ( O-Member )
TC 34/SC 16 - Horizontal methods for molecular biomarker analysis ( O-Member )
TC 34/SC 17 - Management systems for food safety ( P-Member )
TC 35 - Paints and varnishes ( O-Member )
TC 35/SC 2 - Pigments and extenders ( P-Member )
TC 35/SC 9 - General test methods for paints and varnishes ( O-Member )
TC 35/SC 10 - Test methods for binders for paints and varnishes ( O-Member )
TC 35/SC 12 - Preparation of steel substrates before application of paints and related products ( O-Member )
TC 35/SC 14 - Protective paint systems for steel structures ( O-Member )
TC 36 - Cinematography ( O-Member )
TC 37 - Terminology and other language and content resources ( Secretariat )
TC 37/SC 1 - Principles and methods ( P-Member )
TC 37/SC 2 - Terminographical and lexicographical working methods ( P-Member )
TC 37/SC 3 - Systems to manage terminology, knowledge and content ( P-Member )
TC 37/SC 4 - Language resource management ( P-Member )
TC 38 - Textiles ( O-Member )
TC 38/SC 1 - Tests for coloured textiles and colorants ( O-Member )
TC 38/SC 2 - Cleansing, finishing and water resistance tests ( P-Member )
TC 38/SC 23 - Fibres and yarns ( O-Member )
TC 38/SC 24 - Conditioning atmospheres and physical tests for textile fabrics ( O-Member )
TC 39 - Machine tools ( O-Member )
TC 39/SC 2 - Test conditions for metal cutting machine tools ( O-Member )
TC 41 - Pulleys and belts (including veebelts) ( O-Member )
TC 41/SC 1 - Friction ( O-Member )
TC 41/SC 4 - Synchronous belt drives ( O-Member )
TC 42 - Photography ( O-Member )
TC 43 - Acoustics ( P-Member )
TC 43/SC 1 - Noise ( P-Member )
TC 43/SC 2 - Building acoustics ( P-Member )
TC 44 - Welding and allied processes ( P-Member )
TC 44/SC 3 - Welding consumables ( P-Member )
TC 44/SC 5 - Testing and inspection of welds ( P-Member )
TC 44/SC 6 - Resistance welding and allied mechanical joining ( O-Member )
TC 44/SC 8 - Equipment for gas welding, cutting and allied processes ( O-Member )
TC 44/SC 9 - Health and safety ( O-Member )
TC 44/SC 10 - Unification of requirements in the field of metal welding ( P-Member )
TC 44/SC 11 - Qualification requirements for welding and allied processes personnel ( P-Member )
TC 44/SC 12 - Soldering materials ( P-Member )
TC 45 - Rubber and rubber products ( O-Member )
TC 45/SC 1 - Hoses (rubber and plastics) ( P-Member )
TC 46 - Information and documentation ( P-Member )
TC 46/SC 4 - Technical interoperability ( O-Member )
TC 46/SC 8 - Quality - Statistics and performance evaluation ( O-Member )
TC 46/SC 9 - Identification and description ( O-Member )
TC 46/SC 11 - Archives/records management ( O-Member )
TC 48 - Laboratory equipment ( O-Member )
TC 48/SC 3 - Thermometers ( O-Member )
TC 48/SC 4 - Density measuring instruments ( O-Member )
TC 51 - Pallets for unit load method of materials handling ( P-Member )
TC 52 - Light gauge metal containers ( O-Member )
TC 54 - Essential oils ( O-Member )
TC 58 - Gas cylinders ( P-Member )
TC 58/SC 2 - Cylinder fittings ( P-Member )
TC 58/SC 3 - Cylinder design ( P-Member )
TC 58/SC 4 - Operational requirements for gas cylinders ( P-Member )
TC 59 - Building construction ( P-Member )
TC 59/SC 2 - Terminology and harmonization of languages ( P-Member )
TC 59/SC 3 - Functional/user requirements and performance in building construction ( P-Member )
TC 59/SC 13 - Organization of information about construction works ( P-Member )
TC 59/SC 16 - Accessibility and usability of the built environment ( P-Member )
TC 59/SC 17 - Sustainability in building construction ( O-Member )
TC 60 - Gears ( O-Member )
TC 61 - Plastics ( P-Member )
TC 61/SC 1 - Terminology ( O-Member )
TC 61/SC 2 - Mechanical properties ( O-Member )
TC 61/SC 4 - Burning behaviour ( O-Member )
TC 61/SC 5 - Physical-chemical properties ( O-Member )
TC 61/SC 6 - Ageing, chemical and environmental resistance ( O-Member )
TC 61/SC 9 - Thermoplastic materials ( O-Member )
TC 61/SC 10 - Cellular plastics ( O-Member )
TC 61/SC 11 - Products ( O-Member )
TC 61/SC 12 - Thermosetting materials ( O-Member )
TC 61/SC 13 - Composites and reinforcement fibres ( O-Member )
TC 63 - Glass containers ( O-Member )
TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ( O-Member )
TC 67/SC 5 - Casing, tubing and drill pipe ( O-Member )
TC 67/SC 6 - Processing equipment and systems ( P-Member )
TC 68 - Financial services ( P-Member )
TC 68/SC 2 - Security management and general banking operations ( O-Member )
TC 68/SC 4 - Securities and related financial instruments ( P-Member )
TC 68/SC 7 - Core banking ( P-Member )
TC 70 - Internal combustion engines ( O-Member )
TC 70/SC 8 - Exhaust gas emission measurement ( P-Member )
TC 72 - Textile machinery and accessories ( O-Member )
TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories ( O-Member )
TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories ( O-Member )
TC 72/SC 4 - Dyeing and finishing machinery and accessories ( O-Member )
TC 72/SC 5 - Industrial laundry and dry-cleaning machinery and accessories ( O-Member )
TC 72/SC 7 - Data interfaces for monitoring and control of textile machinery ( O-Member )
TC 72/SC 8 - Safety requirements for textile machinery ( O-Member )
TC 72/SC 9 - Graphical symbols for textile machinery ( O-Member )
TC 74 - Cement and lime ( O-Member )
TC 76 - Transfusion, infusion and injection equipment for medical and pharmaceutical use ( P-Member )
TC 77 - Products in fibre reinforced cement ( P-Member )
TC 79 - Light metals and their alloys ( P-Member )
TC 79/SC 2 - Organic and anodic oxidation coatings on aluminium ( P-Member )
TC 79/SC 4 - Unalloyed (refined) aluminium ingots ( P-Member )
TC 79/SC 5 - Magnesium and alloys of cast or wrought magnesium ( O-Member )
TC 79/SC 6 - Wrought aluminium and aluminium alloys ( O-Member )
TC 79/SC 7 - Aluminium and cast aluminium alloys ( P-Member )
TC 81 - Common names for pesticides and other agrochemicals ( O-Member )
TC 82 - Mining ( O-Member )
TC 82/SC 3 - Mining ropes ( P-Member )
TC 83 - Sports and recreational equipment ( P-Member )
TC 83/SC 2 - Camping tents ( O-Member )
TC 83/SC 4 - Snowsports equipment ( Secretariat )
TC 83/SC 5 - Ice hockey equipment and facilities ( O-Member )
TC 84 - Devices for administration of medicinal products and intravascular catheters ( O-Member )
TC 85 - Nuclear energy ( P-Member )
TC 85/SC 2 - Radiation protection ( P-Member )
TC 86 - Refrigeration and air-conditioning ( O-Member )
TC 86/SC 1 - Safety and environmental requirements for refrigerating systems ( O-Member )
TC 86/SC 3 - Testing and rating of factory-made refrigeration systems (excluding systems covered by ISO/TC 86/ SC 5, SC 6 and SC 7) ( O-Member )
TC 86/SC 4 - Testing and rating of refrigerant compressors ( O-Member )
TC 86/SC 6 - Testing and rating of air-conditioners and heat pumps ( O-Member )
TC 86/SC 7 - Testing and rating of commercial refrigerated display cabinets ( O-Member )
TC 86/SC 8 - Refrigerants and refrigeration lubricants ( O-Member )
TC 87 - Cork ( O-Member )
TC 89 - Wood-based panels ( P-Member )
TC 89/SC 1 - Fibre boards ( P-Member )
TC 89/SC 2 - Particle boards ( P-Member )
TC 89/SC 3 - Plywood ( P-Member )
TC 91 - Surface active agents ( P-Member )
TC 92 - Fire safety ( O-Member )
TC 92/SC 1 - Fire initiation and growth ( O-Member )
TC 92/SC 2 - Fire containment ( P-Member )
TC 92/SC 3 - Fire threat to people and environment ( P-Member )
TC 92/SC 4 - Fire safety engineering ( P-Member )
TC 93 - Starch (including derivatives and by-products) ( O-Member )
TC 94 - Personal safety -- Protective clothing and equipment ( P-Member )
TC 94/SC 1 - Head protection ( P-Member )
TC 94/SC 3 - Foot protection ( P-Member )
TC 94/SC 4 - Personal equipment for protection against falls ( O-Member )
TC 94/SC 6 - Eye and face protection ( O-Member )
TC 94/SC 12 - Hearing protection ( O-Member )
TC 94/SC 13 - Protective clothing ( P-Member )
TC 94/SC 14 - Fire-fighters' personal equipment ( P-Member )
TC 96 - Cranes ( O-Member )
TC 96/SC 3 - Selection of wire ropes ( P-Member )
TC 96/SC 4 - Test methods ( O-Member )
TC 96/SC 5 - Use, operation and maintenance ( O-Member )
TC 96/SC 6 - Mobile cranes ( O-Member )
TC 96/SC 7 - Tower cranes ( O-Member )
TC 96/SC 8 - Jib cranes ( O-Member )
TC 96/SC 9 - Bridge and gantry cranes ( O-Member )
TC 96/SC 10 - Design principles and requirements ( O-Member )
TC 98 - Bases for design of structures ( O-Member )
TC 98/SC 1 - Terminology and symbols ( O-Member )
TC 98/SC 2 - Reliability of structures ( O-Member )
TC 98/SC 3 - Loads, forces and other actions ( O-Member )
TC 100 - Chains and chain sprockets for power transmission and conveyors ( O-Member )
TC 102 - Iron ore and direct reduced iron ( O-Member )
TC 104 - Freight containers ( O-Member )
TC 105 - Steel wire ropes ( P-Member )
TC 106 - Dentistry ( P-Member )
TC 106/SC 4 - Dental instruments ( O-Member )
TC 106/SC 6 - Dental equipment ( P-Member )
TC 106/SC 8 - Dental implants ( O-Member )
TC 107 - Metallic and other inorganic coatings ( O-Member )
TC 107/SC 3 - Electrodeposited coatings and related finishes ( O-Member )
TC 107/SC 4 - Hot dip coatings (galvanized, etc.) ( O-Member )
TC 108 - Mechanical vibration, shock and condition monitoring ( P-Member )
TC 108/SC 2 - Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures ( P-Member )
TC 108/SC 4 - Human exposure to mechanical vibration and shock ( P-Member )
TC 108/SC 5 - Condition monitoring and diagnostics of machines ( O-Member )
TC 108/SC 6 - Vibration and shock generating systems ( O-Member )
TC 109 - Oil and gas burners ( P-Member )
TC 110 - Industrial trucks ( O-Member )
TC 111 - Round steel link chains, chain slings, components and accessories ( O-Member )
TC 112 - Vacuum technology ( O-Member )
TC 113 - Hydrometry ( O-Member )
TC 113/SC 2 - Flow measurement structures ( O-Member )
TC 113/SC 6 - Sediment transport ( O-Member )
TC 113/SC 8 - Ground water ( O-Member )
TC 115 - Pumps ( O-Member )
TC 117 - Fans ( O-Member )
TC 118 - Compressors and pneumatic tools, machines and equipment ( O-Member )
TC 119 - Powder metallurgy ( P-Member )
TC 119/SC 2 - Sampling and testing methods for powders (including powders for hardmetals) ( O-Member )
TC 119/SC 3 - Sampling and testing methods for sintered metal materials (excluding hardmetals) ( P-Member )
TC 119/SC 4 - Sampling and testing methods for hardmetals ( P-Member )
TC 119/SC 5 - Specifications for powder metallurgical materials (excluding hardmetals) ( P-Member )
TC 120 - Leather ( O-Member )
TC 120/SC 1 - Raw hides and skins, including pickled pelts ( O-Member )
TC 120/SC 2 - Tanned leather ( O-Member )
TC 121 - Anaesthetic and respiratory equipment ( P-Member )
TC 121/SC 3 - Lung ventilators and related equipment ( P-Member )
TC 121/SC 6 - Medical gas systems ( P-Member )
TC 122 - Packaging ( P-Member )
TC 122/SC 3 - Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) ( P-Member )
TC 122/SC 4 - Packaging and Environment ( O-Member )
TC 123 - Plain bearings ( P-Member )
TC 123/SC 2 - Materials and lubricants, their properties, characteristics, test methods and testing conditions ( O-Member )
TC 123/SC 3 - Dimensions, tolerances and construction details ( O-Member )
TC 123/SC 5 - Quality analysis and assurance ( O-Member )
TC 123/SC 6 - Terms and common items ( O-Member )
TC 126 - Tobacco and tobacco products ( P-Member )
TC 126/SC 1 - Physical and dimensional tests ( P-Member )
TC 127 - Earth-moving machinery ( O-Member )
TC 128 - Glass plant, pipeline and fittings ( P-Member )
TC 130 - Graphic technology ( P-Member )
TC 131 - Fluid power systems ( O-Member )
TC 132 - Ferroalloys ( O-Member )
TC 133 - Sizing systems and designations for clothes ( P-Member )
TC 135 - Non-destructive testing ( P-Member )
TC 135/SC 2 - Surface methods ( P-Member )
TC 135/SC 3 - Ultrasonic testing ( P-Member )
TC 135/SC 4 - Eddy current methods ( P-Member )
TC 135/SC 5 - Radiation methods ( P-Member )
TC 135/SC 7 - Personnel qualification ( P-Member )
TC 135/SC 9 - Acoustic emission testing ( P-Member )
TC 136 - Furniture ( O-Member )
TC 137 - Footwear sizing designations and marking systems ( O-Member )
TC 138 - Plastics pipes, fittings and valves for the transport of fluids ( P-Member )
TC 138/SC 1 - Plastics pipes and fittings for soil, waste and drainage (including land drainage) ( P-Member )
TC 138/SC 2 - Plastics pipes and fittings for water supplies ( P-Member )
TC 138/SC 3 - Plastics pipes and fittings for industrial applications ( P-Member )
TC 138/SC 4 - Plastics pipes and fittings for the supply of gaseous fuels ( P-Member )
TC 138/SC 5 - General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications ( P-Member )
TC 138/SC 6 - Reinforced plastics pipes and fittings for all applications ( Secretariat )
TC 138/SC 7 - Valves and auxiliary equipment of plastics materials ( O-Member )
TC 142 - Cleaning equipment for air and other gases ( P-Member )
TC 144 - Air distribution and air diffusion ( O-Member )
TC 144/SC 2 - Aerodynamic testing and rating of high velocity/ pressure assemblies, low velocity/pressure assemblies, dampers and valves ( O-Member )
TC 145 - Graphical symbols ( P-Member )
TC 145/SC 1 - Public information symbols ( P-Member )
TC 145/SC 2 - Safety identification, signs, shapes, symbols and colours ( P-Member )
TC 145/SC 3 - Graphical symbols for use on equipment ( P-Member )
TC 146 - Air quality ( P-Member )
TC 146/SC 1 - Stationary source emissions ( P-Member )
TC 146/SC 2 - Workplace atmospheres ( P-Member )
TC 146/SC 3 - Ambient atmospheres ( O-Member )
TC 146/SC 4 - General aspects ( O-Member )
TC 146/SC 5 - Meteorology ( P-Member )
TC 146/SC 6 - Indoor air ( P-Member )
TC 147 - Water quality ( P-Member )
TC 147/SC 1 - Terminology ( P-Member )
TC 147/SC 2 - Physical, chemical and biochemical methods ( P-Member )
TC 147/SC 4 - Microbiological methods ( P-Member )
TC 147/SC 5 - Biological methods ( P-Member )
TC 147/SC 6 - Sampling (general methods) ( P-Member )
TC 148 - Sewing machines ( O-Member )
TC 149 - Cycles ( O-Member )
TC 150 - Implants for surgery ( P-Member )
TC 150/SC 1 - Materials ( P-Member )
TC 150/SC 4 - Bone and joint replacements ( P-Member )
TC 150/SC 5 - Osteosynthesis and spinal devices ( P-Member )
TC 150/SC 6 - Active implants ( P-Member )
TC 150/SC 7 - Tissue-engineered medical products ( P-Member )
TC 152 - Gypsum, gypsum plasters and gypsum products ( P-Member )
TC 152/SC 2 - Gypsum building plasters ( P-Member )
TC 152/SC 3 - Gypsum building components ( P-Member )
TC 153 - Valves ( P-Member )
TC 153/SC 1 - Design, manufacture, marking and testing ( P-Member )
TC 154 - Processes, data elements and documents in commerce, industry and administration ( O-Member )
TC 155 - Nickel and nickel alloys ( O-Member )
TC 155/SC 2 - Wrought and cast nickel and nickel alloys ( O-Member )
TC 155/SC 3 - Analysis of nickel, ferronickel and nickel alloys ( O-Member )
TC 155/SC 5 - Ferronickel ( O-Member )
TC 156 - Corrosion of metals and alloys ( O-Member )
TC 158 - Analysis of gases ( O-Member )
TC 159 - Ergonomics ( P-Member )
TC 159/SC 1 - General ergonomics principles ( P-Member )
TC 159/SC 3 - Anthropometry and biomechanics ( O-Member )
TC 159/SC 4 - Ergonomics of human-system interaction ( O-Member )
TC 159/SC 5 - Ergonomics of the physical environment ( O-Member )
TC 161 - Control and protective devices for gas and/or oil burners and appliances ( O-Member )
TC 163 - Thermal performance and energy use in the built environment ( P-Member )
TC 163/SC 1 - Test and measurement methods ( P-Member )
TC 163/SC 2 - Calculation methods ( P-Member )
TC 163/SC 3 - Thermal insulation products ( O-Member )
TC 164 - Mechanical testing of metals ( P-Member )
TC 164/SC 1 - Uniaxial testing ( P-Member )
TC 164/SC 2 - Ductility testing ( O-Member )
TC 164/SC 3 - Hardness testing ( P-Member )
TC 164/SC 4 - Toughness testing -- Fracture (F), Pendulum (P), Tear (T) ( O-Member )
TC 164/SC 5 - Fatigue testing ( O-Member )
TC 165 - Timber structures ( O-Member )
TC 165/SC 1 - Wood materials - Durability and preservation ( P-Member )
TC 166 - Ceramic ware, glassware and glass ceramic ware in contact with food ( O-Member )
TC 167 - Steel and aluminium structures ( O-Member )
TC 167/SC 3 - Aluminium structures ( P-Member )
TC 168 - Prosthetics and orthotics ( P-Member )
TC 170 - Surgical instruments ( O-Member )
TC 171 - Document management applications ( O-Member )
TC 171/SC 2 - Application issues ( P-Member )
TC 172 - Optics and photonics ( P-Member )
TC 172/SC 1 - Fundamental standards ( P-Member )
TC 172/SC 3 - Optical materials and components ( O-Member )
TC 172/SC 4 - Telescopic systems ( P-Member )
TC 172/SC 5 - Microscopes and endoscopes ( O-Member )
TC 172/SC 6 - Geodetic and surveying instruments ( O-Member )
TC 172/SC 7 - Ophthalmic optics and instruments ( P-Member )
TC 173 - Assistive products for persons with disability ( P-Member )
TC 173/SC 1 - Wheelchairs ( P-Member )
TC 173/SC 2 - Classification and terminology ( P-Member )
TC 173/SC 3 - Aids for ostomy and incontinence ( O-Member )
TC 173/SC 6 - Hoists for transfer of persons ( O-Member )
TC 174 - Jewellery ( P-Member )
TC 176 - Quality management and quality assurance ( P-Member )
TC 176/SC 1 - Concepts and terminology ( P-Member )
TC 176/SC 2 - Quality systems ( P-Member )
TC 176/SC 3 - Supporting technologies ( P-Member )
TC 177 - Caravans ( O-Member )
TC 178 - Lifts, escalators and moving walks ( P-Member )
TC 180 - Solar energy ( O-Member )
TC 180/SC 1 - Climate - Measurement and data ( O-Member )
TC 180/SC 4 - Systems - Thermal performance, reliability and durability ( O-Member )
TC 180/SC 5 - Collectors and other components ( O-Member )
TC 181 - Safety of toys ( O-Member )
TC 182 - Geotechnics ( O-Member )
TC 182/SC 1 - Geotechnical investigation and testing ( P-Member )
TC 184 - Automation systems and integration ( O-Member )
TC 184/SC 4 - Industrial data ( P-Member )
TC 184/SC 5 - Architecture, communications and integration frameworks ( P-Member )
TC 185 - Safety devices for protection against excessive pressure ( O-Member )
TC 186 - Cutlery and table and decorative metal hollow-ware ( O-Member )
TC 188 - Small craft ( O-Member )
TC 189 - Ceramic tile ( O-Member )
TC 190 - Soil quality ( P-Member )
TC 190/SC 3 - Chemical methods and soil characteristics ( P-Member )
TC 190/SC 5 - Physical methods ( P-Member )
TC 190/SC 7 - Soil and site assessment ( P-Member )
TC 192 - Gas turbines ( O-Member )
TC 193 - Natural gas ( P-Member )
TC 193/SC 1 - Analysis of natural gas ( P-Member )
TC 194 - Biological evaluation of medical devices ( P-Member )
TC 195 - Building construction machinery and equipment ( O-Member )
TC 196 - Natural stone ( P-Member )
TC 197 - Hydrogen technologies ( O-Member )
TC 198 - Sterilization of health care products ( P-Member )
TC 199 - Safety of machinery ( P-Member )
TC 201 - Surface chemical analysis ( P-Member )
TC 201/SC 1 - Terminology ( O-Member )
TC 201/SC 2 - General procedures ( O-Member )
TC 201/SC 3 - Data management and treatment ( O-Member )
TC 201/SC 4 - Depth profiling ( O-Member )
TC 201/SC 5 - Auger electron spectroscopy ( O-Member )
TC 201/SC 6 - Secondary ion mass spectrometry ( O-Member )
TC 201/SC 7 - X-ray photoelectron spectroscopy ( O-Member )
TC 201/SC 9 - Scanning probe microscopy ( O-Member )
TC 202 - Microbeam analysis ( P-Member )
TC 202/SC 1 - Terminology ( P-Member )
TC 202/SC 2 - Electron probe microanalysis ( P-Member )
TC 202/SC 3 - Analytical electron microscopy ( P-Member )
TC 203 - Technical energy systems ( O-Member )
TC 204 - Intelligent transport systems ( P-Member )
TC 205 - Building environment design ( P-Member )
TC 206 - Fine ceramics ( P-Member )
TC 207 - Environmental management ( P-Member )
TC 207/SC 1 - Environmental management systems ( P-Member )
TC 207/SC 2 - Environmental auditing and related environmental investigations ( P-Member )
TC 207/SC 3 - Environmental labelling ( P-Member )
TC 207/SC 4 - Environmental performance evaluation ( P-Member )
TC 207/SC 5 - Life cycle assessment ( P-Member )
TC 207/SC 7 - Green house gas management and related activities ( P-Member )
TC 208 - Thermal turbines for industrial application (steam turbines, gas expansion turbines) ( O-Member )
TC 210 - Quality management and corresponding general aspects for medical devices ( P-Member )
TC 211 - Geographic information/Geomatics ( P-Member )
TC 212 - Clinical laboratory testing and in vitro diagnostic test systems ( P-Member )
TC 213 - Dimensional and geometrical product specifications and verification ( P-Member )
TC 214 - Elevating work platforms ( O-Member )
TC 215 - Health informatics ( P-Member )
TC 216 - Footwear ( O-Member )
TC 217 - Cosmetics ( P-Member )
TC 218 - Timber ( P-Member )
TC 219 - Floor coverings ( P-Member )
TC 220 - Cryogenic vessels ( P-Member )
TC 221 - Geosynthetics ( P-Member )
TC 222 - Personal financial planning ( P-Member )
TC 223 - Societal Security ( P-Member )
TC 224 - Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators ( P-Member )
TC 225 - Market, opinion and social research ( P-Member )
TC 227 - Springs ( P-Member )
TC 228 - Tourism and related services ( P-Member )
TC 229 - Nanotechnologies ( P-Member )
TC 230 - Project Committee: Psychological assessment ( P-Member )
TC 231 - Project Committee: Brand valuation ( P-Member )
TC 232 - Learning services for non-formal education and training ( P-Member )
TC 235 - Project Committee: Rating services ( P-Member )
TC 236 - Project Committee: Project Management ( P-Member )
TC 237 - Project committee: Exhibition terminology ( P-Member )
TC 238 - Solid biofuels ( P-Member )
TC 244 - Industrial furnaces and associated thermal processing equipment ( P-Member )
TC 246 - Project committee: Anti-counterfeiting tools ( P-Member )
TC 247 - Fraud countermeasures and controls ( O-Member )
TC 249 - Traditional chinese medicine ( O-Member )
TC 250 - Project committee: Sustainability in event management ( P-Member )
ISO/IEC/JTC 2 - Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology ( P-Member )